Article dans une revue
2022
- titre
- A reference-free mill monitoring method based on the inter-insert periodic correlation in angular domain
- auteur
- Xiaowen Zhu, François Girardin, Jérôme Antoni
- article
- International Journal of Advanced Manufacturing Technology, 2022, 121 (1-2), pp.1063-1080. ⟨10.1007/s00170-022-09330-w⟩
- DOI
- DOI : 10.1007/s00170-022-09330-w
- Accès au bibtex
-
2018
- titre
- Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach
- auteur
- Lakhdar Bouzid, Sofiane Berkani, Mohamed Athmane Yallese, François Girardin, Tarek Mabrouki
- article
- International Journal of Industrial Engineering Computations, 2018, pp.349-368. ⟨10.5267/j.ijiec.2017.8.002⟩
- DOI
- DOI : 10.5267/j.ijiec.2017.8.002
- Accès au bibtex
-
- titre
- Simultaneous improvement of surface quality and productivity using grey relational analysis based Taguchi design for turning couple (AISI D3 steel/ mixed ceramic tool (Al2O3 + TiC))
- auteur
- Oussama Zerti, Mohamed Athmane Yallese, Abderrahmen Zerti, Salim Belhadi, François Girardin
- article
- International Journal of Industrial Engineering Computations, 2018, pp.173-194. ⟨10.5267/j.ijiec.2017.7.001⟩
- DOI
- DOI : 10.5267/j.ijiec.2017.7.001
- Accès au bibtex
-
2017
- titre
- Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts
- auteur
- Mohamed Fnides, Mohamed Yallese, Riad Khattabi, Tarek Mabrouki, François Girardin
- article
- International Journal of Industrial Engineering Computations, 2017, pp.493-512. ⟨10.5267/j.ijiec.2017.3.001⟩
- DOI
- DOI : 10.5267/j.ijiec.2017.3.001
- Accès au bibtex
-
- titre
- Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach
- auteur
- Hamid Tebassi, Mohamed Athmane Yallese, Salim Belhadi, François Girardin, Tarek Mabrouki
- article
- International Journal of Industrial Engineering Computations, 2017, pp.347-362. ⟨10.5267/j.ijiec.2016.12.003⟩
- DOI
- DOI : 10.5267/j.ijiec.2016.12.003
- Accès au bibtex
-
- titre
- On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit
- auteur
- Hamid Tebassi, Mohamed Athmane Yallese, Ikhlas Meddour, François Girardin, Tarek Mabrouki
- article
- Periodica Polytechnica Mechanical Engineering, 2017, 61 (1), pp.1-11. ⟨10.3311/PPme.8742⟩
- DOI
- DOI : 10.3311/PPme.8742
- Accès au bibtex
-
- titre
- Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function
- auteur
- Amel Chabbi, Mohamed Athmane Yallese, Ikhlas Meddour, Mourad Nouioua, Tarek Mabrouki, François Girardin
- article
- Measurement - Journal of the International Measurement Confederation (IMEKO), 2017, 95, pp.99-115. ⟨10.1016/j.measurement.2016.09.043⟩
- DOI
- DOI : 10.1016/j.measurement.2016.09.043
- Accès au bibtex
-
- titre
- Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN)
- auteur
- Mourad Nouioua, Mohamed Athmane Yallese, Riad Khettabi, Salim Belhadi, Mohamed Lamine Bouhalais, François Girardin
- article
- International Journal of Advanced Manufacturing Technology, 2017, 93 (5-8), pp.2485-2504. ⟨10.1007/s00170-017-0589-2⟩
- DOI
- DOI : 10.1007/s00170-017-0589-2
- Accès au bibtex
-
- titre
- Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods
- auteur
- A. Chabbi, A. Yallese, M. Nouioua, I. Meddour, T. Mabrouki, François Girardin
- article
- International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp.2267-2290. ⟨10.1007/s00170-016-9858-8⟩
- DOI
- DOI : 10.1007/s00170-016-9858-8
- Accès au bibtex
-
2016
- titre
- Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718
- auteur
- Hamid Tebassi, Mohamed Athmane Yallese, Riad Khettabi, Salim Belhadi, Ikhlas Meddour, François Girardin
- article
- International Journal of Industrial Engineering Computations, 2016, pp.111-134. ⟨10.5267/j.ijiec.2015.7.003⟩
- DOI
- DOI : 10.5267/j.ijiec.2015.7.003
- Accès au bibtex
-
- titre
- Performance of coated and uncoated mixed ceramic tools in hard turning process
- auteur
- Hamza Bensouilah, Hamdi Aouici, Ikhlas Meddour, Mohamed Athmane Yallese, Tarek Mabrouki, François Girardin
- article
- Measurement - Journal of the International Measurement Confederation (IMEKO), 2016, 82, pp.1-18. ⟨10.1016/j.measurement.2015.11.042⟩
- DOI
- DOI : 10.1016/j.measurement.2015.11.042
- Accès au bibtex
-
2014
- titre
- Precision of the IAS monitoring system based on the elapsed time method in the spectral domain
- auteur
- Hugo Andre, François Girardin, A. Bourdon, Jérôme Antoni, Didier Rémond
- article
- Mechanical Systems and Signal Processing, 2014, 44 (1-2), pp.14-30. ⟨10.1016/j.ymssp.2013.06.020⟩
- DOI
- DOI : 10.1016/j.ymssp.2013.06.020
- Accès au texte intégral et bibtex
-
- titre
- Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel
- auteur
- Lakhdar Bouzid, Smail Boutabba, Mohamed Athmane Yallese, Salim Belhadi, Francois Girardin
- article
- International Journal of Advanced Manufacturing Technology, 2014, 74 (5-8), pp.879-891. ⟨10.1007/s00170-014-6043-9⟩
- DOI
- DOI : 10.1007/s00170-014-6043-9
- Accès au bibtex
-
- titre
- Angular analysis of the cyclic impacting oscillations in a robotic grinding process
- auteur
- Farzad Rafieian, François Girardin, Zhaoheng Liu, Marc Thomas, Bruce Hazel
- article
- Mechanical Systems and Signal Processing, 2014, 44 (1-2), p. 160-176. ⟨10.1016/j.ymssp.2013.05.005⟩
- DOI
- DOI : 10.1016/j.ymssp.2013.05.005
- Accès au bibtex
-
- titre
- Indicators for monitoring chatter in milling based on instantaneous angular speeds
- auteur
- Mourad Lamraoui, Marc Thomas, Mohamed El Badaoui, François Girardin
- article
- Mechanical Systems and Signal Processing, 2014, 44 (1-2), p. 72-85. ⟨10.1016/j.ymssp.2013.05.002⟩
- DOI
- DOI : 10.1016/j.ymssp.2013.05.002
- Accès au bibtex
-
2011
- titre
- Towards a physical comprehension of material strengthening factors during macro to micro-scale
- auteur
- Muhammad Asad, Tarek Mabrouki, François Girardin, Yancheng Zhang, Jean Francois Rigal
- article
- Mechanika, 2011, 17 (1), pp.97-104
- Accès au bibtex
-
2010
- titre
- A new method for detecting tool wear and breakage in milling
- auteur
- François Girardin, Didier Rémond, Jean-François Rigal
- article
- International Journal of Material Forming, 2010, 3 (1), pp.463-466
- Accès au bibtex
-
- titre
- Tool wear detection in milling-an original approach with a non-dedicated sensor
- auteur
- Francois Girardin, Didier Remond, Jean-Francois Rigal
- article
- Mechanical Systems and Signal Processing, 2010, 24 (6), pp.1907-1920. ⟨10.1016/j.ymssp.2010.02.008⟩
- DOI
- DOI : 10.1016/j.ymssp.2010.02.008
- Accès au bibtex
-
- titre
- High frequency correction of dynamometer for cutting force observation in milling
- auteur
- Francois Girardin, Didier Remond, Jean-Francois Rigal
- article
- JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2010, 132, 031002 (8 p.)
- Accès au bibtex
-
2008
- titre
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)
- auteur
- Tarek Mabrouki, François Girardin, M. Asad, Jean-François Rigal
- article
- International Journal of Machine Tools & Manufacture, 2008, pp.1187-1197
- Accès au bibtex
-
1995
- titre
- Experimental investigation of the relative importance of carrier heating and spectral‐hole‐burning on nonlinear gain in bulk and strained multi‐quantum‐well 1.55 μm lasers
- auteur
- François Girardin, Guang‐hua Duan, Philippe Gallion, Anne Talneau, Abdallah Ougazzaden
- article
- Applied Physics Letters, 1995, 67 (6), pp.771-773. ⟨10.1063/1.115462⟩
- DOI
- DOI : 10.1063/1.115462
- Accès au bibtex
-
Communication dans un congrès
2023
- titre
- The design of optimal indicators for early fault detection using a generalized likelihood ratio test
- auteur
- Kayacan Kestel, Jérôme Antoni, Cédric Peeters, Quentin Leclère, François Girardin, Ted Ooijevaar, Jan Helsen
- article
- Surveillance, Vibrations, Shock and Noise, Institut Supérieur de l'Aéronautique et de l'Espace [ISAE-SUPAERO], Jul 2023, Toulouse, France
- Accès au texte intégral et bibtex
-
2022
- titre
- Generalized likelihood ratio-based condition indicator maximization via Rayleigh quotient iteration
- auteur
- Kayacan Kestel, Cédric Peeters, Jérôme Antoni, Quentin Leclere, Francois Girardin, R Brijder, Jan Helsen
- article
- ISMA 2022, 2022, Leuven (BE), Belgium
- Accès au bibtex
-
- titre
- Discussion on the Differences Between the Cyclic Spectral Correlation and Coherence for Cyclostationarity-Based Condition Monitoring
- auteur
- Kayacan Kestel, Cédric Peeters, Jérôme Antoni, Quentin Léclere, François Girardin, Robert Brijder, Jan Helsen
- article
- 14th Annual Conference of the Prognostics and Health Management Society, Oct 2022, Nashville, United States. ⟨10.36001/phmconf.2022.v14i1.3150⟩
- DOI
- DOI : 10.36001/phmconf.2022.v14i1.3150
- Accès au bibtex
-
2020
- titre
- Angular velocity and cyclo(non)stationarity as an innovation in machining monitoring
- auteur
- Xiaowen Zhu, Francois Girardin, Jérôme Antoni
- article
- ISMA2020 Conference on Noise and Vibration Engineering, Sep 2020, Leuven, Belgium
- Accès au bibtex
-
2017
- titre
- Fatigue crack detection based on changes of the structure vibration characteristics
- auteur
- Raissa D M Brandão, Nacer Hamzaoui, François Girardin, Pascal Voagner, Thierry Mazoyer
- article
- Surveillance 9, May 2017, Fez (Maroc), Morocco
- Accès au texte intégral et bibtex
-
2016
- titre
- Analysis of the Rolling Element Bearing data set of the Center for Intelligent Maintenance Systems of the University of Cincinnati
- auteur
- William Gousseau, Jérôme Antoni, François Girardin, Julien Griffaton
- article
- CM2016, Oct 2016, Charenton, France
- Accès au texte intégral et bibtex
-
2015
- titre
- Détection des amorces de défaillances lentes des structures vibrantes
- auteur
- Raissa de Melo Brandao, François Girardin, Nacer Hamzaoui, Pascal Vouagner, Thierry Mazoyer
- article
- CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
- Accès au texte intégral et bibtex
-
- titre
- Optimisation des paramètres de coupe par l'analyse de la rugosité
- auteur
- Meriem Dib, François Girardin, Nacer Hamzaoui, Lakhdar Laouar
- article
- CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
- Accès au texte intégral et bibtex
-
- titre
- Modeling and optimization of tool wear and surface roughness in turning of austenitic stainless steel using response surface methodology
- auteur
- Sofian Berkani, Lakhdar Bouzid, Hamza Bensouilah, Mohamed Athman Yallese, François Girardin, Tarek Mabrouki
- article
- CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
- Accès au texte intégral et bibtex
-
- titre
- Preliminary investigation on the detection of slow-growing cracks in vibrating structures
- auteur
- Raissa de Melo Brandao, Nacer Hamzaoui, François Girardin, Pascal Vouagner, Thierry Mazoyer
- article
- Surveillance 8, Oct 2015, Roanne, France
- Accès au bibtex
-
- titre
- Détection des amorces de défaillances lentes des structures vibrantes
- auteur
- Raissa de Melo Brandao, Nacer Hamzaoui, François Girardin, Pascal Vouagner, Thierry Mazoyer
- article
- 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
- Accès au bibtex
-
2013
- titre
- An Analysis of Instantaneous Angular Speed Measurement Errors
- auteur
- Q. Leclere, François Girardin, Didier Rémond
- article
- Surveillance 7 International Conference, Oct 2013, CHARTRES, France. pp.1-11
- Accès au bibtex
-
2012
- titre
- Cyclostationarity analysis of instantaneous angular speeds for monitoring chatter in high speed milling
- auteur
- Mourad Lamraoui, Marc Thomas, Mohamed El Badaoui, François Girardin
- article
- IECON 2012 - 38th Annual Conference of IEEE Industrial Electronics, Oct 2012, Montreal, Canada. pp.3868-3873, ⟨10.1109/IECON.2012.6389274⟩
- DOI
- DOI : 10.1109/IECON.2012.6389274
- Accès au bibtex
-
2011
- titre
- Using angular speed measurement with Hall effect sensors to observe grinding operation with flexible robot
- auteur
- François Girardin, Farzad Rafieian, Zhaoheng Liu, Marc Thomas, Bruce Hazel
- article
- Surveillance 6, Oct 2011, Compiègne, France
- Accès au texte intégral et bibtex
-
2010
- titre
- A new technique for cutting characterisation and monitoring in milling
- auteur
- François Girardin, Didier Rémond, Jean Francois Rigal
- article
- 17° Colloque Vibrations Chocs et Bruit, Jun 2010, Ecully, France. pp.CDRom
- Accès au bibtex
-
- titre
- Détection de l'usure des outils de coupe en fraisage par vitesse instantanée
- auteur
- François Girardin, Didier Rémond, Jean Francois Rigal
- article
- 28th CMVA seminar, Oct 2010, Québec, Canada. pp.CDRom
- Accès au bibtex
-
- titre
- A new method for detecting tool wear and breakage in milling
- auteur
- François Girardin, Didier Rémond, Jean Francois Rigal
- article
- 13th International ESAFORM Conference on Material Forming, Apr 2010, Brescia, Italy. pp.CDRom
- Accès au bibtex
-
- titre
- An original approach for in situ measurement of cutting force and monitoring in milling
- auteur
- François Girardin, Didier Rémond, Jean Francois Rigal
- article
- 2nd International Conference Process Machine Interactions, Jun 2010, Vancouver, Canada. pp.CDRom
- Accès au bibtex
-
2009
- titre
- Le dynamomètre KISTLER au delà des limites officielles : cas d'une utilisation en fraisage à grande vitesse
- auteur
- François Girardin, Didier Rémond, Jean-François Rigal
- article
- 11° Colloque AIP PRIMECA, Apr 2009, LaPlagne, France. pp.1-7
- Accès au bibtex
-
- titre
- Surveillance de l'usure et de l'endommagement d'outils en usinage grande vitesse à l'aide de la mesure de vitesse instantanée
- auteur
- Didier Rémond, François Girardin, Jean Francois Rigal
- article
- 2° congrès international sur l'ingénierie des risques industriels, May 2009, Reims, France. pp.CDRom
- Accès au bibtex
-
2008
- titre
- High frequency caracterisation of milling, 16°
- auteur
- François Girardin, Didier Remond, Jean-François Rigal
- article
- Colloque Vibrations Chocs et Bruit, Jun 2008, France
- Accès au bibtex
-
- titre
- Dry cutting study of an aluminium alloy (a2024-t351) : a numerical and experimental approach" Key note paper
- auteur
- M. Asad, François Girardin, Tarek Mabrouki, Jean-François Rigal
- article
- 11th ESAFORM2008 conference on material forming., Apr 2008, France
- Accès au bibtex
-
- titre
- Contribution à la caractérisation à haute frequence de la coupe ugv
- auteur
- François Girardin, Didier Remond, Jean-François Rigal
- article
- 5èmes assises MUGV (Machine et Usinage à Grande Vitesse), Jun 2008, France
- Accès au bibtex
-
- titre
- Caractérisation à haute fréquence de la coupe en fraisage
- auteur
- François Girardin, Didier Remond, Jean-François Rigal
- article
- XVIème colloque VCB (Vibrations, Choc et Bruit), Jun 2008, France
- Accès au bibtex
-
- titre
- Mise au point doutils de caractérisation à haute fréquence de la coupe en fraisage, en vue dapplication à des cas dUGV
- auteur
- François Girardin, Didier Remond, Jean-François Rigal
- article
- 13ème session MANUFACTURING 21, Apr 2008, France
- Accès au bibtex
-
2007
- titre
- Etude dynamique de la formation du copeau Contribution : un modèle de simulation numérique pour le fraisage des alliages daluminium
- auteur
- M. Asad, François Girardin, Tarek Mabrouki, Jean-François Rigal
- article
- 10ème coll. Nat. AIP PRIMECA, Apr 2007, France
- Accès au bibtex
-