2025
Journal articles
- titre
- Advancements and challenges in polymer-based mechanical metamaterials
- auteur
- Abderrahmane Ayadi, Patricia Krawczak
- article
- Express Polymer Letters, 2025, 19 (2), pp.122-123. ⟨10.3144/expresspolymlett.2025.9⟩
- Accès au bibtex
-
2024
Journal articles
- titre
- An Overview of the Non-Energetic Valorization Possibilities of Plastic Waste via Thermochemical Processes
- auteur
- Kazem Moussa, Sary Awad, Patricia Krawczak, Ahmad Al Takash, Jalal Faraj, Mahmoud Khaled
- article
- Materials, 2024, 17 (7), pp.1460. ⟨10.3390/ma17071460⟩
- Accès au texte intégral et bibtex
-
- titre
- Women in Science: Materials 2023
- auteur
- Giulia Masi, Tadeja Kosec, Ilaria Cacciotti, Patricia Krawczak
- article
- Frontiers in Materials, 2024, 11, pp.1549094. ⟨10.3389/fmats.2024.1549094⟩
- Accès au texte intégral et bibtex
-
Scientific blog post
- titre
- Quèsaco la fabrication additive ?
- auteur
- Patricia Krawczak
- article
- 2024
- Accès au bibtex
-
Special issue
- titre
- Advanced Composites Manufacturing and Plastics Processing
- auteur
- Patricia Krawczak, Ludwig Cardon
- article
- Polymers, 2024
- Accès au bibtex
-
- titre
- Fiber Reinforced Thermoplastic Composites: Processing/Structure/Performance Inter-relationships, 2nd Edition
- auteur
- Abderrahmane Ayadi, Patricia Krawczak
- article
- Polymers, 2024
- Accès au bibtex
-
- titre
- Structural Health Monitoring of Polymer Composites
- auteur
- Patricia Krawczak, Salim Chaki
- article
- Materials, 2024
- Accès au bibtex
-
- titre
- Women in Science : Materials 2023
- auteur
- Giulia Masi, Tadeja Kosec, Ilaria Cacciotti, Patricia Krawczak
- article
- Frontiers in Materials, 2024
- Accès au bibtex
-
Books
- titre
- Fiber Reinforced Thermoplastic Composites: Processing/Structure/Performance Inter-Relationships
- auteur
- Abderrahmane Ayadi, Patricia Krawczak, Chung-Hae Park
- article
- Abderrahmane Ayadi; Patricia Krawczak; Chung-Hae Park. MDPI, 222 p., 2024, 978-3-7258-1866-2. ⟨10.3390/books978-3-7258-1865-5⟩
- Accès au texte intégral et bibtex
-
- titre
- Fusion Bonding/Welding of Polymer Composites
- auteur
- Patricia Krawczak, Andre Chateau Akue Asseko, Chung Hae Park
- article
- Patricia Krawczak; André Chateau Akué Asséko; Chung-Hae Park. MDPI, 179 p., 2024, 978-3-0365-9964-9. ⟨10.3390/books978-3-0365-9964-9⟩
- Accès au texte intégral et bibtex
-
2023
Journal articles
- titre
- Investigating the Effect of Interface Temperature on Molecular Interdiffusion during Laser Transmission Welding of 3D-Printed Composite Parts
- auteur
- Anh-Duc Le, André Chateau Akué Asséko, Benoît Cosson, Patricia Krawczak
- article
- Materials, 2023, Fusion Bonding/Welding of Polymer Composites, 16 (18), pp.6121. ⟨10.3390/ma16186121⟩
- Accès au texte intégral et bibtex
-
- titre
- Vers une industrie des matières plastiques circulaires à faible émission de carbone
- auteur
- Patricia Krawczak
- article
- MINERAI, 2023, 14, pp.35
- Accès au bibtex
-
- titre
- Mechanical behaviour of multifunctional composites
- auteur
- Patricia Krawczak, Christian Weisse
- article
- JEC Composites Magazine, 2023, 150, pp.93-96
- Accès au bibtex
-
- titre
- Women in science: Materials 2021
- auteur
- Patricia Krawczak, Lucia Baldino, Francisca Garcia Caballero, Ya Wang
- article
- Frontiers in Materials, 2023, 10, pp.1129648. ⟨10.3389/fmats.2023.1129648⟩
- Accès au texte intégral et bibtex
-
Scientific blog post
- titre
- La soutenable légèreté de l’automobile
- auteur
- Patricia Krawczak
- article
- 2023
- Accès au bibtex
-
Special issue
- titre
- Advances in the Circularity of Polymeric and Composite Materials
- auteur
- Patricia Krawczak, Sary Awad, Florentin Berthet, J. Lopez-Cuesta
- article
- Materials, 2023
- Accès au bibtex
-
- titre
- Fusion Bonding/Welding of Polymer Composites
- auteur
- Patricia Krawczak, Andre Chateau Akue Asseko, Chung Hae Park
- article
- Materials, 2023
- Accès au bibtex
-
- titre
- Women in Science: Materials 2021
- auteur
- Patricia Krawczak, Lucia Baldino, Francisca Garcia Caballero, Ya Wang
- article
- Frontiers in Materials, 2023
- Accès au bibtex
-
- titre
- Fiber Reinforced Thermoplastic Composites: Processing/Structure/Performance Inter-relationships
- auteur
- Abderrahmane Ayadi, Patricia Krawczak, Chung Hae Park
- article
- Polymers, 2023
- Accès au bibtex
-
2022
Journal articles
- titre
- Non-destructive health monitoring of structural polymer composites: Trends and perspectives in the digital era
- auteur
- Salim Chaki, Patricia Krawczak
- article
- Materials, 2022, Structural Health Monitoring of Polymer Composites, 15 (21), pp.7838. ⟨10.3390/ma15217838⟩
- Accès au texte intégral et bibtex
-
- titre
- Reactive processing of acrylic-based thermoplastic composites: A mini-review
- auteur
- Masoud Bodaghi, Chung Hae Park, Patricia Krawczak
- article
- Frontiers in Materials, 2022, 9, pp.931338. ⟨10.3389/fmats.2022.931338⟩
- Accès au texte intégral et bibtex
-
- titre
- Towards a circular, low-carbon emission plastics industry
- auteur
- Patricia Krawczak
- article
- Express Polymer Letters, 2022, 16 (9), pp.901-901. ⟨10.3144/expresspolymlett.2022.65⟩
- Accès au texte intégral et bibtex
-
2021
Journal articles
- titre
- Automotive plastics: What future is there for polymers in tomorrow's electric and autonomous vehicles?
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2021, 15 (4), pp.288-288. ⟨10.3144/expresspolymlett.2021.25⟩
- Accès au bibtex
-
- titre
- Women in science : Materials
- auteur
- Maria Chiara Bignozzi, Jacqueline Anne Johnson, Patricia Krawczak, Emilia Morallón, Ming Xu
- article
- Frontiers in Materials, 2021, 8, pp.#668092. ⟨10.3389/fmats.2021.668092⟩
- Accès au bibtex
-
Special issue
- titre
- Women in Science: Materials
- auteur
- Maria Chiara Bignozzi, Patricia Krawczak, Jacqueline Anne Johnson, Emilia Morallón, Ming Xu
- article
- Frontiers in Materials, 2021
- Accès au bibtex
-
Other publications
- titre
- Composites for aeroplanes: light as a feather?
- auteur
- Patricia Krawczak
- article
- Braincamp "Is a carbon-free aviation industry really possible?", Episode 6, Polytechnique Insights, La revue de l'Institut Polytechnique de Paris, 2021
- Accès au bibtex
-
- titre
- Des matériaux composites pour alléger les avions
- auteur
- Patricia Krawczak
- article
- Dossier "Aviation décarbonée : rêve d'Icare ou réalité ?", Episode 6, Polytechnique Insights, La revue de l'Institut Polytechnique de Paris, 2021
- Accès au bibtex
-
Books
- titre
- Women in Science: Materials
- auteur
- Maria Chiara Bignozzi, Patricia Krawczak, Emilia Morallón, Ming Xu, Jacqueline Anne Johnson
- article
- Maria Chiara Bignozzi; Patricia Krawczak; Emilia Morallon; Ming Xu; Jacqueline Anne Johnson. Frontiers Media SA, pp.445, 2021, 978-2-88966-951-6. ⟨10.3389/978-2-88966-951-6⟩
- Accès au texte intégral et bibtex
-
2020
Journal articles
- titre
- Coupling inverse fin method with infrared thermography to determine the effective thermal conductivity of extruded thermoplastic foams
- auteur
- André Chateau Akué Asséko, Benoit Cosson, Salim Chaki, Clément Duborper, Patricia Krawczak, Marie-France Lacrampe
- article
- JMST Advances, 2020, 2 (4), pp.103-110. ⟨10.1007/s42791-020-00036-2⟩
- Accès au texte intégral et bibtex
-
- titre
- Toughness improvement of novel biobased aromatic polyamide/SEBS/organoclay ternary hybrids
- auteur
- Eric Lafranche, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2020, 137 (29), pp.48888. ⟨10.1002/app.48888⟩
- Accès au texte intégral et bibtex
-
- titre
- Advanced thermoplastic composites and manufacturing processes
- auteur
- Patricia Krawczak, Alfonso Maffezzoli
- article
- Frontiers in Materials, 2020, 7, pp.166. ⟨10.3389/fmats.2020.00166⟩
- Accès au bibtex
-
- titre
- Le contrôle non destructif des composites
- auteur
- Patricia Krawczak, Salim Chaki
- article
- IT Industrie & Technologies, 2020, 1030, pp.49-56
- Accès au bibtex
-
- titre
- Bubble assisted vacuum thermoforming: considerations to extend the use of in-situ stereo-DIC measurements to stretching of sagged thermoplastic sheets
- auteur
- Abderrahmane Ayadi, Marie-France Lacrampe, Patricia Krawczak
- article
- International Journal of Material Forming, 2020, 13 (1), pp.59-76. ⟨10.1007/s12289-018-01467-y⟩
- Accès au texte intégral et bibtex
-
- titre
- Bubble assisted vacuum thermoforming: considerations to extend the use of in-situ stereo-DIC measurements to stretching of sagged thermoplastic sheets
- auteur
- A. Ayadi, M.-F. Lacrampe, P. Krawczak
- article
- International Journal of Material Forming, 2020, 13 (1), pp.59-76. ⟨10.1007/s12289-018-01467-y⟩
- Accès au bibtex
-
Special issue
- titre
- Advanced Thermoplastic Composites and Manufacturing Processes
- auteur
- Alfonzo Maffezzoli, Patricia Krawczak
- article
- Frontiers in Materials, 2020
- Accès au bibtex
-
2019
Journal articles
- titre
- Analysis of impregnation mechanism of weft-knitted commingled yarn composites by staged consolidation and laboratory X-ray computed tomography
- auteur
- Abderrahmane Ayadi, Mylène Deleglise-Lagardere, Chung Hae Park, Patricia Krawczak
- article
- Frontiers in Materials, 2019, 6, pp.#255. ⟨10.3389/fmats.2019.00255⟩
- Accès au bibtex
-
- titre
- Analysis of Impregnation Mechanism of Weft-Knitted Commingled Yarn Composites by Staged Consolidation and Laboratory X-Ray Computed Tomography
- auteur
- Abderrahmane Ayadi, Mylène Deléglise-Lagardère, Chung Hae Park, Patricia Krawczak
- article
- Frontiers in Materials, 2019, 6, ⟨10.3389/fmats.2019.00255⟩
- Accès au bibtex
-
- titre
- Quand l’intelligence artificielle se mêle de l’état de santé et de l’espérance de vie des matériaux composites
- auteur
- Salim Chaki, Pierre Duchene, Patricia Krawczak
- article
- Contrôles essais mesures, 2019, 68, pp.54-57
- Accès au bibtex
-
- titre
- High performance finned-tube heat exchangers based on filled polymer
- auteur
- Joseph Jabbour, Serge Russeil, Mohammed Mobtil, Daniel Bougeard, Marie-France Lacrampe, Patricia Krawczak
- article
- Applied Thermal Engineering, 2019, 155, pp.620-630. ⟨10.1016/j.applthermaleng.2019.04.036⟩
- Accès au texte intégral et bibtex
-
- titre
- Inside the lab: Polymers and Composites Technology & Mechanical Engineering Centre, IMT Lille Douai
- auteur
- Patricia Krawczak
- article
- JEC Composites Magazine, 2019, 56 (128), pp.64-65
- Accès au bibtex
-
- titre
- Preform permeability measurement and 3D resin flow simulation for dry AFP
- auteur
- Naziha Chebil, Romain Agogue, Pierre Beauchêne, Mylène Deleglise-Lagardere, Chung-Hae Park, Patricia Krawczak
- article
- JEC Composites Magazine, 2019, 127, pp.158-161
- Accès au bibtex
-
- titre
- Polymer composites: Evolve towards multifunctionality or perish
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2019, 13 (9), pp.771-771. ⟨10.3144/expresspolymlett.2019.65⟩
- Accès au bibtex
-
Conference papers
- titre
- Assessment of principal strain uncertainties in stereo-DIC due to uncontrollable change of initial boundary conditions during vacuum-assisted thermoforming
- auteur
- A. Ayadi, M.-F. Lacrampe, P. Krawczak
- article
- 22nd International Conference on Material Forming (ESAFORM 2019), May 2019, Vitoria-Gasteiz, Spain. pp.130002, ⟨10.1063/1.5112662⟩
- Accès au bibtex
-
Poster communications
- titre
- POPCOM platform: Composites Advanced Manufacturing
- auteur
- Patricia Krawczak, Mylène Deleglise-Lagardere, E. Lafranche, Cosson Benoit, Chung-Hae Park
- article
- Journée Industrielle "Matériaux haute performance et écomatériaux dans les transports", May 2019, Paris, France
- Accès au texte intégral et bibtex
-
- titre
- Fabrication par imprégnation directe et assemblage par soudage de composites thermoplastiques structuraux à renfort textile en fibres végétales
- auteur
- Chung-Hae Park, E. Lafranche, Cosson Benoit, Patricia Krawczak, Kim Sihwan, Mylène Deleglise-Lagardere, Andre Chateau Akue Asseko, Guilherme Apolinario Testoni
- article
- Journée Industrielle "Matériaux haute performance et écomatériaux dans les transports", May 2019, Paris, France
- Accès au texte intégral et bibtex
-
2018
Journal articles
- titre
- Le recyclage des composites
- auteur
- Patricia Krawczak, Marie France Lacrampe
- article
- IT Industrie & Technologies, 2018, n°1013, pp.57-64
- Accès au bibtex
-
- titre
- Injection-moussage physique de pièces microcellulaires en polymère biosourcé
- auteur
- E. Lafranche, Ykhlef Nazim, Patricia Krawczak
- article
- Plastiques et Caoutchouc Magazine, 2018, 951, pp.56-59
- Accès au bibtex
-
- titre
- Electrical and Dielectric Properties of Multi-Walled Carbon Nanotube Filled Polypropylene Nanocomposites
- auteur
- Kalappa Prashantha, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak, Géraldine Dupin, Michael Claes, A. Tewari
- article
- Polymers and Polymer Composites, 2018, 18 (9), pp.489-494. ⟨10.1177/096739111001800903⟩
- Accès au bibtex
-
- titre
- Simultaneous plasticization and blending of isolate soy protein with poly[(butylene succinate)-co-adipate] by one-step extrusion process
- auteur
- Jennifer Renoux, Jagadeesh Dani, Catherine Douchain, Kalappa Prashantha, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2018, 135 (27), pp.#46442. ⟨10.1002/app.46442⟩
- Accès au texte intégral et bibtex
-
- titre
- Development of nanofibrillar morphologies in poly( l -lactide)/poly(amide) blends: role of the matrix elasticity and identification of the critical shear rate for the nodular/fibrillar transition
- auteur
- Mohammed Yousfi, Tarek Dadouche, Dimitri Chomat, Cédric Samuel, J. Soulestin, M.-F. Lacrampe, P. Krawczak
- article
- RSC Advances, 2018, 8 (39), pp.22023 - 22041. ⟨10.1039/C8RA03339K⟩
- Accès au texte intégral et bibtex
-
- titre
- Design of biobased poly(butylene succinate) foams by single-screw extrusion: Identification of relevant rheological parameters controlling foam morphologies
- auteur
- Clément Duborper, Cédric Samuel, André Chateau Akué Asséko, Cyril Loux, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymer Engineering and Science, 2018, 58 (4), pp.503-512. ⟨10.1002/pen.24733⟩
- Accès au texte intégral et bibtex
-
- titre
- Scalable production of multifunctional bio-based polyamide 11/graphene nanocomposites by melt extrusion processes via masterbatch approach
- auteur
- B. Rashmi, K. Prashantha, M.-F. Lacrampe, P. Krawczak
- article
- Advances in Polymer Technology, 2018, 37 (4), pp.1067 - 1075. ⟨10.1002/adv.21757⟩
- Accès au texte intégral et bibtex
-
- titre
- Une approche multi-technique non destructive pour le monitoring de l'état de santé des matériaux composites structuraux
- auteur
- Salim Chaki, Pierre Duchene, Patricia Krawczak
- article
- Essais & Simulations, 2018, 133, pp.52-56
- Accès au bibtex
-
- titre
- A review of non-destructive techniques used for mechanical damage assessment in polymer composites
- auteur
- Pierre Duchene, Salim Chaki, Abderrahmane Ayadi, Patricia Krawczak
- article
- Journal of Materials Science, 2018, 53 (11), pp.7915-7938. ⟨10.1007/s10853-018-2045-6⟩
- Accès au bibtex
-
- titre
- Techniques d’imagerie rapide appliquées au thermoformage des thermoplastiques
- auteur
- Abderrahmane Ayadi, Marie-France Lacrampe, Patricia Krawczak
- article
- Plastiques et Caoutchouc Magazine, 2018, 946, pp.56-59
- Accès au bibtex
-
- titre
- 3D textile reinforced composites: From manufacturing process to structural design
- auteur
- Dmytro Vasiukov, Yang Liu, Chung-Hae Park, Patricia Krawczak
- article
- JEC Composites Magazine, 2018, 121, pp.67-69
- Accès au bibtex
-
Scientific blog post
- titre
- Composite Materials: The race to keep going faster
- auteur
- Patricia Krawczak
- article
- 2018, https://blogrecherche.wp.imt.fr/en/2018/02/06/composite-materials-going-faster/ ; https://blogrecherche.wp.imt.fr/2017/11/09/materiaux-composites-temps-cycle/
- Accès au bibtex
-
Conference papers
- titre
- Water-assited extrusion compounding process to reduce the total Volatile organic compounds in natural fibre-filled composites for automotive interior applications
- auteur
- Clovis Berthelin, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak, Françoise Berzin, Loubna Lemkhanter, Tiphaine Pacary, Bénédicte Goffin, Pierre Lemaitre
- article
- International Meeting «Exploring lignocellulosic biomass ELB 2018 - Challenges and opportunities for bioeconomy» (ELB-2018), Jun 2018, Reims, France
- Accès au bibtex
-
- titre
- Acousto-ultrasonic damage evaluation of carbon fibre composites using pencil lead break sources
- auteur
- Pierre Duchene, Salim Chaki, Patricia Krawczak
- article
- 18th European Conference on Composites Materials (ECCM18), Jun 2018, Athens, Greece
- Accès au texte intégral et bibtex
-
- titre
- Out-of-autoclave manufacturing of carbon/PEKK composites: Influence of process parameters on the interlaminar consolidation
- auteur
- Pierre Beauchene, Patricia Krawczak, Chung-Hae Park, Florence Saffar, Camille Sonnenfeld
- article
- Congrès International SFIP “Les composites haute performance: De la petite série à la grande diffusion”, SFIP / CETIM / IRT Jules Verne / Technocampus Composites, Jun 2018, Nantes, France
- Accès au bibtex
-
- titre
- A comprehensive study of bubble inflation in vacuum-assisted thermoforming based on whole-field strain measurements
- auteur
- A. Ayadi, M.-F. Lacrampe, P. Krawczak
- article
- 21st International ESAFORM Conference on Material Forming (ESAFORM 2018), Apr 2018, Palermo, Italy. pp.120004, ⟨10.1063/1.5034972⟩
- Accès au texte intégral et bibtex
-
2017
Journal articles
- titre
- Fabrication à bas coût de biocomposites structuraux
- auteur
- Chung-Hae Park, Eric Lafranche, Patricia Krawczak
- article
- Plastiques et Caoutchouc Magazine, 2017, 937, pp.54-57
- Accès au bibtex
-
- titre
- Polymères conducteurs thermiques pour échangeurs de chaleur
- auteur
- Daniel Bougeard, Joseph Jabbour, Patricia Krawczak, Marie-France Lacrampe, Serge Russeil
- article
- Plastiques et Caoutchouc Magazine, 2017, 941, pp.66-69
- Accès au bibtex
-
- titre
- Impression 3D de polymères semi-cristallins
- auteur
- Sébastien Charlon, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Plastiques et Caoutchouc Magazine, 2017, 942, pp.58-61
- Accès au bibtex
-
- titre
- Apport de l'ingénierie du vivant aux applications innovantes de la biologie industrielle: Cas des matériaux agro-sourcés
- auteur
- François Ténégal, Patricia Krawczak
- article
- Réalités industrielles. Annales des mines, 2017, 1, pp.29-33
- Accès au bibtex
-
- titre
- Extrusion assistée eau appliquée au recyclage des biocomposites
- auteur
- Marie-France Lacrampe, Jérémie Soulestin, Patricia Krawczak, Christophe Kimmerlin
- article
- Plastiques et Caoutchouc Magazine, 2017, 944, pp.60-63
- Accès au bibtex
-
- titre
- Electro-active polymers for wearable energy harvesting applications
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2017, 11 (9), pp.673 - 673. ⟨10.3144/expresspolymlett.2017.65⟩
- Accès au bibtex
-
Scientific blog post
- titre
- L’impression 3D: Nouvelle révolution industrielle ?
- auteur
- Patricia Krawczak
- article
- 2017, https://blogrecherche.wp.imt.fr/2017/11/15/impression-3d-revolution-industrielle/
- Accès au bibtex
-
- titre
- Matériaux composites: La course pour aller toujours plus vite
- auteur
- Patricia Krawczak
- article
- 2017, https://blogrecherche.wp.imt.fr/2017/11/09/materiaux-composites-temps-cycle/ ; https://blogrecherche.wp.imt.fr/en/2018/02/06/composite-materials-going-faster/
- Accès au bibtex
-
Conference papers
- titre
- Analyse des échangeurs de chaleur tube-ailette à base de polymère chargé
- auteur
- Joseph Jabbour, Daniel Bougeard, Serge Russeil, Mohammed Mobtil, Marie-France Lacrampe, Patricia Krawczak
- article
- Journée Jeunes Chercheurs 2017 GEPROC-UGéPe, Nov 2017, Douai, France
- Accès au bibtex
-
- titre
- Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et à matrices thermodurcissable ou thermoplastique
- auteur
- Chung-Hae Park, Cosson Benoit, Mylene Deleglise, Eric Lafranche, Patricia Krawczak
- article
- Journée Club d’intérêt SINFONI "Fibres végétales techniques, des solutions industrielles pour matériaux", Sep 2017, Roubaix, France
- Accès au bibtex
-
- titre
- Assessment of the elongational properties of HIPS membranes based on full-field strain measurements during positive thermoforming
- auteur
- Abderrahmane Ayadi, Marie-France Lacrampe, Patricia Krawczak
- article
- 12th International Conference on Advances in Experimental Mechanics, Aug 2017, Sheffield, United Kingdom
- Accès au texte intégral et bibtex
-
- titre
- Self-reinforcement process of 100% thermoplastic composites by in-situ fibrillation
- auteur
- Mohamed Yousfi, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- POLYMERIC MATERIALS AND THE TRANSPORT INDUSTRY A Key contribution to mobility and weight saving, SFIP-IMT Lille Douai-GPA, May 2017, DOUAI, France
- Accès au bibtex
-
- titre
- Thermally conductive polymers and optimized compactness, development vectors for efficient and cost-effective heat exchangers
- auteur
- Daniel Bougeard, Marie-France Lacrampe, Serge Russeil, Joseph Jabbour, Patricia Krawczak
- article
- Congrès International Matériaux Polymères & Industrie des Transports 2017: Une contribution clé à la mobilité et l’allègement, SFIP / GPA / IMT Lille Douai, May 2017, Douai, France
- Accès au bibtex
-
- titre
- Performances d'un échangeur à tubes et ailettes en polymère: Influence de la compacité et de la conductivité thermique
- auteur
- Joseph Jabbour, Daniel Bougeard, Serge Russeil, Marie-France Lacrampe, Patricia Krawczak
- article
- XIIIème Colloque International Franco-Québécois sur la Thermique des Systèmes (CIFQ 2017), May 2017, Saint-Lo, France
- Accès au bibtex
-
- titre
- Freeformer technology, optimization of processing parameters
- auteur
- Jeremie Soulestin, Sébastien Charlon, Marie-France Lacrampe, Patricia Krawczak
- article
- Europolymer Conference EUPOC 2017 "Polymers and Additive Manufacturing: From Fundamentals to Applications", European Polymer Federation, May 2017, Gargano, Italy
- Accès au bibtex
-
- titre
- A method of measuring the effective thermal conductivity of thermoplastic foams
- auteur
- Andre Chateau Akue Asseko, Benoît Cosson, Salim Chaki, Clément Duborper, Marie-France Lacrampe, Patricia Krawczak
- article
- 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.060001.1-6, ⟨10.1063/1.5008064⟩
- Accès au texte intégral et bibtex
-
- titre
- Modeling of uniaxial compression of fiber reinforcements using finite strains
- auteur
- Sébastien Comas-Cardona, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak
- article
- 10th International Esaform Conference on Material Forming (ESAFORM 2007), Apr 2017, Zaragoza, Spain. pp.1064-1067, ⟨10.1063/1.2729655⟩
- Accès au texte intégral et bibtex
-
Patents
- titre
- Method for extruding a polymer in the presence of water
- auteur
- Frederic Malet, Jean-Jacques Flat, François Touchaleaume, Jacques Devaux, Patricia Krawczak, Michel Sclavons, Jérémie Soulestin
- article
- United States, Patent n° : US 9579838. 2017, pp.1-6
- Accès au bibtex
-
2016
Journal articles
- titre
- Mousses polymères électroactives
- auteur
- Patricia Krawczak, Marie-France Lacrampe, Jeremie Soulestin, Cédric Samuel
- article
- Plastiques et Caoutchouc Magazine, 2016, 934, pp.64-67
- Accès au bibtex
-
- titre
- Numerical analysis of effective thermal conductivity of plastic foams
- auteur
- Andre Chateau Akue Asseko, Benoît Cosson, Clément Duborper, Marie-France Lacrampe, Patricia Krawczak
- article
- Journal of Materials Science, 2016, 51 (20), pp.9217 - 9228. ⟨10.1007/s10853-016-0161-8⟩
- Accès au bibtex
-
- titre
- Vibrational energy-harvesting performance of bio-sourced flexible polyamide 11/layered silicate nanocomposite films
- auteur
- M. Leveque, C. Douchain, Mohamed Rguiti, K. Prashantha, Christian Courtois, M.-F. Lacrampe, P. Krawczak
- article
- International Journal of Polymer Analysis and Characterization, 2016, 22 (1), pp.72 - 82. ⟨10.1080/1023666X.2016.1233784⟩
- Accès au bibtex
-
- titre
- Structural health of polymer composites: Non-destructive diagnosis using a hybrid NDT approach
- auteur
- Salim Chaki, Walid Harizi, Patricia Krawczak, Gérard Bourse, Mohamed Ourak
- article
- JEC Composites Magazine, 2016, 107 (53(107)), pp.62-65
- Accès au texte intégral et bibtex
-
- titre
- Thin wall injection-overmoulding of polyamide 6/polypropylene multilayer parts: influence of processing conditions on thermomechanical properties of the layer assembly
- auteur
- Sandra Macedo, Eric Lafranche, Carla Martins, Catherine Douchain, Cyril Loux, Patricia Krawczak
- article
- International Journal of Materials and Product Technology, 2016, 52 (1/2), pp.53-75. ⟨10.1504/IJMPT.2016.073619⟩
- Accès au bibtex
-
- titre
- A microstructural approach for modelling flexural properties of long glass fibre reinforced polyamide6.6
- auteur
- Eric Lafranche, Arnaud Coulon, Patricia Krawczak, Jean-Pierre Ciolczyk, Eric Gamache
- article
- Journal of Composite Materials, 2016, 51 (1), pp.3-16. ⟨10.1177/0021998316637664⟩
- Accès au texte intégral et bibtex
-
- titre
- Estampage et surmoulage "one shot" pour application auto
- auteur
- Eric Lafranche, Patricia Krawczak, Xavier Cerillo, Thierry Renault
- article
- Plastiques et Caoutchouc Magazine, 2016, 932, pp.52-56
- Accès au bibtex
-
- titre
- Process d'autorenforcement par fibrillation in situ
- auteur
- Patricia Krawczak, Marie-France Lacrampe, Jérémie Soulestin, Mohamed Yousfi
- article
- Plastiques et Caoutchouc Magazine, 2016, 929, pp.46-48
- Accès au bibtex
-
- titre
- Fatigue modelling of composite materials for industrial applications
- auteur
- Alain Trameçon, Dmytro Vasiukov, Chung-Hae Park, Patricia Krawczak
- article
- JEC Composites Magazine, 2016, 108, pp.52-54
- Accès au bibtex
-
- titre
- Flexural creep behaviour of long glass fibre reinforced polyamide 6.6 under thermal-oxidative environment
- auteur
- Arnaud Coulon, Eric Lafranche, Catherine Douchain, Patricia Krawczak, Jean-Pierre Ciolczyk, Eric Gamache
- article
- Journal of Composite Materials, 2016, 51 (17), pp.2477 - 2490. ⟨10.1177/0021998316672521⟩
- Accès au texte intégral et bibtex
-
Scientific blog post
- titre
- Bioplastiques: ‘’la route vers la performance est encore longue’’
- auteur
- Patricia Krawczak
- article
- 2016, https://blogrecherche.wp.imt.fr/2016/10/20/bioplastiques-performance/ ; https://blogrecherche.wp.imt.fr/en/2016/10/20/bioplastics-long-road-performance/
- Accès au bibtex
-
- titre
- Bioplastics: ‘’Still a long road to higher performance’’
- auteur
- Patricia Krawczak
- article
- 2016
- Accès au bibtex
-
- titre
- Agro-based composites materials: A Mines area of expertise
- auteur
- Patricia Krawczak, Anne Bergeret
- article
- 2016, https://blogrecherche.wp.imt.fr/en/2016/05/09/agro-based-composite-materials/ ; https://blogrecherche.wp.imt.fr/2016/05/09/composites-agrosources-savoir-faire-mines/
- Accès au bibtex
-
- titre
- Les matériaux composites agro-sourcés: Un savoir-faire des Mines
- auteur
- Patricia Krawczak, Anne Bergeret
- article
- 2016, https://blogrecherche.wp.imt.fr/2016/05/09/composites-agrosources-savoir-faire-mines/ ; https://blogrecherche.wp.imt.fr/en/2016/05/09/agro-based-composite-materials/
- Accès au bibtex
-
Conference papers
- titre
- Numerical analysis of effective thermal conductivity of plastic foams
- auteur
- Andre Chateau Akue Asseko, Cosson Benoit, Clément Duborper, Marie-France Lacrampe, Patricia Krawczak
- article
- 4th Cellular Materials Conference (CellMAT 2016), Dec 2016, Dresden, Germany
- Accès au bibtex
-
- titre
- In-situ fibrillation of bio-based PLA/PA11 blends: Effect of the matrix elasticity on the morphology, rheology and mechanical properties
- auteur
- D Chomat, T Dadouche, Mohammed Yousfi, J Soulestin, M-F Lacrampe, P Krawczak
- article
- 50ème congrès annuel du Groupe Français de Rhéologie, Oct 2016, LILLE, France
- Accès au texte intégral et bibtex
-
- titre
- Performance of one row finned-tube compact heat exchanger: Influence of geometry, compactness and fin thermal conductivity
- auteur
- Joseph Jabbour, Daniel Bougeard, Serge Russeil, Marie-France Lacrampe, Patricia Krawczak
- article
- EUROTHERM Seminar No 106: Physical and Chemical Phenomena in Heat Exchangers and Multifunctional Reactors for Sustainable Technology, Oct 2016, Paris, France
- Accès au bibtex
-
- titre
- Plastification simultanée des protéines de soja isolées en mélange avec poly(butylène succinate – co – adipate): Influence du procédé sur la morphologie, les propriétés mécaniques et rhéologiques
- auteur
- Jennifer Draou-Renoux, Jagadeesh Dani, Catherine Douchain, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- Journée Jeunes Chercheurs GEPROC – UGéPE, Oct 2016, Louvain-La-Neuve, Belgium
- Accès au bibtex
-
- titre
- Simultaneous plasticization and blending of isolated soy protein with poly(butylene succinate-co-adipate)
- auteur
- Jennifer Draou-Renoux, Jagadeesh Dani, Catherine Douchain, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- 7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium
- Accès au texte intégral et bibtex
-
- titre
- Influence of rheological characteristics on the morphology of chemically-foamed biobased polymers by single-screw extrusion
- auteur
- Clément Duborper, Cédric Samuel, Cyril Loux, Marie-France Lacrampe, Patricia Krawczak
- article
- 7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium. pp.21-23
- Accès au texte intégral et bibtex
-
- titre
- New opportunities offered by Freeformer 3D printing process
- auteur
- Sébastien Charlon, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- 32nd Annual Meeting of Polymer Processing Society (PPS-32), Jul 2016, Lyon, France
- Accès au bibtex
-
- titre
- Fabrication par procédé d’imprégnation directe de composites structuraux à renfort textile en fibres végétales et matrices thermodurcissable ou thermoplastique
- auteur
- Patricia Krawczak, Chung-Hae Park, Eric Lafranche
- article
- Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
- Accès au bibtex
-
- titre
- Systèmes polymères multiphasés : Des polymères de commodité vers les polymères de performance, par le contrôle des propriétés interfaciales et des procédés de mise en œuvre et mise en forme
- auteur
- Jeremie Soulestin, Marie-France Lacrampe, Kalappa Prashantha, Patricia Krawczak, Cédric Samuel
- article
- Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
- Accès au bibtex
-
- titre
- Modélisation et simulation de la fabrication des matériaux composites à matrice thermodurcissable ou thermoplastique en conditions sévères de mise en œuvre et mise en forme
- auteur
- Chung-Hae Park, Mylene Deleglise, Patricia Krawczak
- article
- Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
- Accès au bibtex
-
Patents
- titre
- Method for extruding a polymer in the presence of water
- auteur
- Frederic Malet, Jean-Jacques Flat, François Touchaleaume, Jacques Devaux, Patricia Krawczak, Michel Sclavons, Jérémie Soulestin
- article
- France, N° de brevet: FR 2969528 (Publication) - 1061274 (Enregistrement national). 2016, pp.1-18
- Accès au bibtex
-
- titre
- Method for extruding a polymer in the presence of water
- auteur
- Frederic Malet, Jean-Jacques Flat, François Touchaleaume, Jacques Devaux, Patricia Krawczak, Michel Sclavons, Jérémie Soulestin
- article
- Japan, Patent n° : JP 5957008. 2016, pp.1-12
- Accès au bibtex
-
2015
Journal articles
- titre
- Numerical simulation on the flow and heat transfer of polymer powder in rotational molding
- auteur
- Huu Thuan Nguyen, Benoît Cosson, Marie France Lacrampe, Patricia Krawczak
- article
- International Journal of Material Forming, 2015, 8 (3), pp.423 - 438. ⟨10.1007/s12289-014-1185-8⟩
- Accès au bibtex
-
- titre
- Unsaturated and Saturated Permeabilities of Fiber Reinforcement: Critics and Suggestions
- auteur
- Chung Hae Park, Patricia Krawczak
- article
- Frontiers in Materials, 2015, 2, ⟨10.3389/fmats.2015.00038⟩
- Accès au texte intégral et bibtex
-
- titre
- Melt-blended halloysite nanotubes/wheat starch nanocomposites as drug delivery system
- auteur
- H. Schmitt, N. Creton, K. Prashantha, J. Soulestin, M.F. Lacrampe, P. Krawczak
- article
- Polymer Engineering and Science, 2015, 55 (3), pp.573 - 580. ⟨10.1002/pen.23919⟩
- Accès au bibtex
-
- titre
- Preparation and characterization of plasticized starch/halloysite porous nanocomposites possibly suitable for biomedical applications
- auteur
- Hélène Schmitt, Nicolas Creton, Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2015, 132 (4), pp.n/a - n/a. ⟨10.1002/app.41341⟩
- Accès au bibtex
-
- titre
- Phosphorous antioxidants against polypropylene thermal degradation during rotational molding-kinetic modeling
- auteur
- Salah Sarrabi, Marie-France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2015, 132 (3), pp.n/a - n/a. ⟨10.1002/app.41285⟩
- Accès au bibtex
-
- titre
- Studies on the effect of storage time and plasticizers on the structural variations in thermoplastic starch
- auteur
- H. Schmitt, A. Guidez, K. Prashantha, J. Soulestin, M.F. Lacrampe, P. Krawczak
- article
- Carbohydrate Polymers, 2015, 115, pp.364 - 372. ⟨10.1016/j.carbpol.2014.09.004⟩
- Accès au bibtex
-
- titre
- JEC Composites Magazine, Anniversary issue, Professional comments
- auteur
- Patricia Krawczak
- article
- JEC Composites Magazine, 2015, 100, pp.29
- Accès au bibtex
-
- titre
- Additive manufacturing of plastic and polymer composite parts: Promises and challenges of 3D-printing
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2015, 9 (11), pp.959 - 959. ⟨10.3144/expresspolymlett.2015.86⟩
- Accès au bibtex
-
- titre
- Study of partial shape memory effect of polymers by multicycle tests
- auteur
- Sofiane Abdallah-Elhirtsi, Joseph Fitoussi, Baralu-Jagannatha Rashmi, Kalappa Prashantha, Sedigheh Farzaneh, Marie-France Lacrampe, Patricia Krawczak, Abbas Tcharkhtchi
- article
- Polymer Composites, 2015, 36 (6), pp.1145 - 1151. ⟨10.1002/pc.23472⟩
- Accès au texte intégral et bibtex
-
- titre
- Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubes
- auteur
- Baralu J. Rashmi, Kalappa Prashantha, Marie-France Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2015, 9 (8), pp.721 - 735. ⟨10.3144/expresspolymlett.2015.67⟩
- Accès au bibtex
-
- titre
- Chemical foaming extrusion of poly(lactic acid) with chain-extenders: Physical and morphological characterizations
- auteur
- J.M. Julien, J.-C. Quantin, J.-C. Bénézet, A. Bergeret, M.F. Lacrampe, P. Krawczak
- article
- European Polymer Journal, 2015, 67, pp.40-49. ⟨10.1016/j.eurpolymj.2015.03.011⟩
- Accès au texte intégral et bibtex
-
- titre
- Qualifying dispersion and distribution of carbon nanotubes in polyamide matrix during melt-mixing by flow simulation
- auteur
- Cyril Loux, Kalappa Prashantha, Frédéric Roger, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymers and Polymer Composites, 2015, 23 (5), pp.305-316
- Accès au bibtex
-
Scientific blog post
- titre
- Mines Douai, Armines et le Cetim célèbrent 15 années de collaboration
- auteur
- Patricia Krawczak
- article
- 2015, https://blogrecherche.wp.imt.fr/2015/09/10/mines-douai-armines-et-le-cetim-celebrent-15-annees-de-collaboration/
- Accès au bibtex
-
- titre
- L’allègement des véhicules: Un défi pour les chercheurs de Mines Douai
- auteur
- Patricia Krawczak
- article
- 2015, https://blogrecherche.wp.imt.fr/2015/06/03/lallegement-des-vehicules-un-defi-pour-les-chercheurs-de-mines-douai/
- Accès au bibtex
-
Conference papers
- titre
- Optimal design of fused deposition modeling structures using COMSOL Multiphysics® software
- auteur
- Frédéric Roger, Patricia Krawczak
- article
- COMSOL Conference 2015, Oct 2015, Grenoble, France
- Accès au bibtex
-
- titre
- Modeling of thermoplastic and thermoset composites manufacturing processes for prediction of process-induced defects
- auteur
- Chung-Hae Park, Patricia Krawczak
- article
- SAMPE Europe Conference 2015, Sep 2015, Amiens, France
- Accès au bibtex
-
- titre
- 3D-printing of thermoplastic structures by FDM using heterogeneous infill and multi-materials: An integrated design-advanced manufacturing approach for factories of the future
- auteur
- Frederic Roger, Patricia Krawczak
- article
- CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
- Accès au texte intégral et bibtex
-
- titre
- Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubes
- auteur
- Baralu Jagannatha Rashmi, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- The 31st International Conference of the Polymer Processing Society (PPS-31), Jun 2015, Jeju Island, South Korea. pp.060001.1 - 060001.5, ⟨10.1063/1.4942284⟩
- Accès au bibtex
-
- titre
- Recyclage des matériaux composites: Etat de l'art et perspectives
- auteur
- Patricia Krawczak
- article
- Journée Technique ''Le recyclage et la valorisation des matériaux composites'', May 2015, Méaulte, France
- Accès au bibtex
-
- titre
- Effect of nanoparticle incorporation on amorphous and crystalline fractions of polyamide 6 matrix
- auteur
- Sébastien Alix, Mohamed Yousfi, Marie-France Lacrampe, Patricia Krawczak, Jeremie Soulestin
- article
- Eurofillers - Polymer Blends 2015, Apr 2015, Montpellier, France
- Accès au bibtex
-
2014
Journal articles
- titre
- Deformation mechanisms of plasticized starch materials
- auteur
- P. Mikus, S. Alix, J. Soulestin, M.F. Lacrampe, P. Krawczak, X. Coqueret, P. Dole
- article
- Carbohydrate Polymers, 2014, 114, pp.450 - 457. ⟨10.1016/j.carbpol.2014.06.087⟩
- Accès au bibtex
-
- titre
- In situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition
- auteur
- Dimitri Chomat, Jeremie Soulestin, Marie-France Lacrampe, Michel Sclavons, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2014, pp.n/a - n/a. ⟨10.1002/app.41680⟩
- Accès au bibtex
-
- titre
- Evaluation of Rheological Properties of Non-Newtonian Fluids in Micro Rheology Compounder: Experimental Procedures for a Reliable Polymer Melt Viscosity Measurement
- auteur
- Mohamed Yousfi, Sébastien Alix, Maxime Lebeau, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymer Testing, 2014, Accepted for publication, 40, pp.207-217. ⟨10.1016/j.polymertesting.2014.09.010⟩
- Accès au bibtex
-
- titre
- Structural evolution of poly(lactic acid)/poly(ethylene oxide)/unmodified clay upon ambient ageing
- auteur
- Joffrey Derho, Jeremie Soulestin, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2014, 131 (13), pp.n/a - n/a. ⟨10.1002/app.40426⟩
- Accès au bibtex
-
- titre
- Processing and Characterization of Polypropylene Filled with Multiwalled Carbon Nanotube and Clay Hybrid Nanocomposites
- auteur
- Kalappa Prashantha, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- International Journal of Polymer Analysis and Characterization, 2014, 19 (4), pp.363-371. ⟨10.1080/1023666X.2014.902715⟩
- Accès au texte intégral et bibtex
-
- titre
- Effect of the Interdiffusion at the Polymer/Polymer Interface on the Flexural Properties of Over-Moulded Short Glass Fibre/Glass Fabric Reinforced PA6 Composites
- auteur
- Eric Lafranche, Thierry Renault, Patricia Krawczak
- article
- Key Engineering Materials, 2014, 611-612, pp.821 - 828. ⟨10.4028/www.scientific.net/KEM.611-612.821⟩
- Accès au bibtex
-
- titre
- Processing-induced degradation of nanoclay organic modifier in melt-mixed PET/PE blends during twin screw extrusion at industrial scale: Effect on morphology and mechanical behavior.
- auteur
- Mohamed Yousfi, Sophie Lepretre, Jeremie Soulestin, Bruno Vergnes, Marie-France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2014, 131 (4), ⟨10.1002/app.39712⟩
- Accès au bibtex
-
Conference papers
- titre
- Développement de bio-nanocomposites « verts » amidon/halloysites à structure massive ou poreuse d’intérêt biomédical
- auteur
- Hélène Schmitt, Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- 23èmes Journées Techniques SAMPE Chapter France, SAMPE, Nov 2014, Bordeaux, France
- Accès au bibtex
-
- titre
- Mechanical behavior and essential work of fracture of starch-based blown films
- auteur
- Mélanie Nottez, Salim Chaki, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- The 30th International Conference of the Polymer Processing Society (PPS-30), Jun 2014, Cleveland, United States. pp.080007.1-080007.5, ⟨10.1063/1.4918463⟩
- Accès au bibtex
-
- titre
- How to control and optimize the morphology of polypropylene/polyamide 6 blends using ionic liquids and nanofillers: Influence of the polarity and viscosity
- auteur
- Mohamed Yousfi, Maxime Lebeau, Marie-France Lacrampe, Patricia Krawczak, Jeremie Soulestin
- article
- 30th International Conference of the Polymer Processing Society (PPS-30), Jun 2014, Cleveland, Ohio, United States
- Accès au bibtex
-
- titre
- Effect of the interdiffusion at the polymer/polymer interface on the flexural properties of over-moulded short glass fibre/glass fabric reinforced PA6 composites
- auteur
- Eric Lafranche, Thierry Renault, Patricia Krawczak
- article
- 17th International ESAFORM Conference on Material Forming – ESAFORM 2014, May 2014, Espoo, Finland. pp.821-828, ⟨10.4028/www.scientific.net/KEM.611-612.821⟩
- Accès au texte intégral et bibtex
-
- titre
- Highlighting The Role of Ionic Liquids in The Control of The Morphology of Immiscible Polymer Blends By Interfacial Tension Assessment
- auteur
- Mohamed Yousfi, Maxime Lebeau, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- AERC (Annual European Rheology Conference), The European Society of Rheology, Apr 2014, Karlsruhe, Germany
- Accès au bibtex
-
- titre
- Development of "green" bio-nanocomposites based on starch and halloysites with controlled bulk or porous structure for biomedical application
- auteur
- Hélène Schmitt, Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- SAMPE Europe's 35th International Conference "SEICO: Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", Student's Conference & Poster Exhibition, SAMPE, Mar 2014, Paris, France
- Accès au bibtex
-
2013
Journal articles
- titre
- Prediction of injection-moulded flax fibre reinforced polypropylene tensile properties through a micro-morphology analysis
- auteur
- Eric Lafranche, Vânia Oliveira, Carla Martins, Patricia Krawczak
- article
- Journal of Composite Materials, 2013, 49 (1), pp.113 - 128. ⟨10.1177/0021998313514875⟩
- Accès au bibtex
-
- titre
- Highly dispersed polyamide-11/halloysite nanocomposites: Thermal, rheological, optical, dielectric, and mechanical properties
- auteur
- Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2013, 130 (1), pp.313 - 321. ⟨10.1002/app.39160⟩
- Accès au texte intégral et bibtex
-
- titre
- Compatibilization of Immiscible Polymer Blends by Organoclay: Effect of Nanofiller or Organo-Modifier?
- auteur
- Mohamed Yousfi, Jeremie Soulestin, Bruno Vergnes, Marie-France Lacrampe, Patricia Krawczak
- article
- Macromolecular Materials and Engineering, 2013, 298 (7), pp.757-770. ⟨10.1002/mame.201200138⟩
- Accès au bibtex
-
- titre
- Morphology and mechanical properties of PET/PE blends compatibilized by nanoclays: Effect of thermal stability of nanofiller organic modifier
- auteur
- Mohamed Yousfi, Jeremie Soulestin, Bruno Vergnes, Marie-France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2013, 128 (5), p. 2766-2778. ⟨10.1002/app.38450⟩
- Accès au bibtex
-
- titre
- Prediction of Tensile Properties of Injection Moulding Flax Fibre Reinforced Polypropylene from Morphology Analysis
- auteur
- Eric Lafranche, Carla Isabel Martins, Vania M. Oliveira, Patricia Krawczak
- article
- Key Engineering Materials, 2013, 554-557, pp.1573-1582. ⟨10.4028/www.scientific.net/KEM.554-557.1573⟩
- Accès au texte intégral et bibtex
-
- titre
- Development of water-blown bio-based thermoplastic polyurethane foams using bio-derived chain extender
- auteur
- Baralu Jagannatha Rashmi, Daniela Rusu, Kalappa Prashantha, Marie France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2013, 128 (1), pp.292 - 303. ⟨10.1002/app.38183⟩
- Accès au bibtex
-
- titre
- Metallocene Polypropylene Crystallization Kinetic During Cooling in Rotational Molding Thermal Condition
- auteur
- Salah Sarrabi, Séverine A.E. Boyer, Marie-France Lacrampe, P Krawczak, Abbas Tcharkhtchi
- article
- Journal of Applied Polymer Science, 2013, 130 (1), pp.222-233. ⟨10.1002/app.39035⟩
- Accès au texte intégral et bibtex
-
- titre
- Plasticized-starch/poly(ethylene oxide) blends prepared by extrusion
- auteur
- Fang Yu, Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Carbohydrate Polymers, 2013, 91 (1), pp.253 - 261. ⟨10.1016/j.carbpol.2012.08.008⟩
- Accès au bibtex
-
- titre
- Development of bio-based thermoplastic polyurethanes formulations using corn-derived chain extender for reactive rotational molding
- auteur
- Baralu J. Rashmi, Daniela Rusu, Kalappa Prashantha, Marie-France Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2013, 7 (10), pp.852 - 862. ⟨10.3144/expresspolymlett.2013.82⟩
- Accès au bibtex
-
- titre
- Medical plastics: Serving healthcare
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2013, 7 (8), pp.651 - 651. ⟨10.3144/expresspolymlett.2013.61⟩
- Accès au bibtex
-
- titre
- Characterisation of low-odour emissive polylactide/cellulose fibre biocomposites for car interior
- auteur
- C. Courgneau, D. Rusu, C. Henneuse, Violette Ducruet, M-F. Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2013, 7 (9), pp.787 - 804. ⟨10.3144/expresspolymlett.2013.76⟩
- Accès au texte intégral et bibtex
-
Conference papers
- titre
- Characterisation of low-emissive polylactide/cellulose fibre biocomposites for automotive applications
- auteur
- Cécile Courgneau, Daniela Rusu, Catherine Henneuse, Violette Ducruet, Marie-France Lacrampe, Patricia Krawczak
- article
- 4th International Conference on Biodegradable Polymers and Sustainable Composites (BIOPOL-2013), Oct 2013, Rome, Italy
- Accès au bibtex
-
- titre
- Volatile organic compounds from the thermodegradation of polylactide during processing: Extrusion and thermoforming
- auteur
- Daniela Rusu, Aurélien Piroëlle, Marie-France Lacrampe, Catherine Henneuse, Patricia Krawczak, Violette Ducruet
- article
- 4. International Conference on Biodegradable and Biobased Polymers (BIOPOL 2013), European Centre for Nanostructured Polymers (ECNP).; Università degli Studi di Perugia. ITA.; Universidad de Alicante. ESP.; Consejo Superior de Investigaciones Científicas (Spain) (CSIC). ESP., Oct 2013, Rome, Italy
- Accès au bibtex
-
- titre
- Multifunctional biobased polyamide-11/halloysites nanocomposites: Processing and characterization
- auteur
- Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- 4th International Conference on Biodegradable and Biobased Polymers (BIOPOL-2013), Oct 2013, Rome, Italy
- Accès au bibtex
-
- titre
- Melt-processing, structure and properties of thermoplastic starch: Effect of storage time and plasticizers on the structural stability
- auteur
- Hélène Schmitt, Adeline Guidez, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- European Congress and Exhibition on Advanced Materials and Processes - EUROMAT 2013, Sep 2013, Sevilla, France
- Accès au bibtex
-
- titre
- In-situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition
- auteur
- Dimitri Chomat, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- 29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
- Accès au bibtex
-
- titre
- PLA-based ternary systems combining plasticizer and nanofillers: Influence of native clay on aging
- auteur
- Joffrey Derho, Jeremie Soulestin, Patricia Krawczak
- article
- 29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
- Accès au bibtex
-
- titre
- How to take advantage of nanofillers to improve the ductility of immiscible polypropylene/polyamide blends ?
- auteur
- Jeremie Soulestin, David Lemény, Marie-France Lacrampe, Patricia Krawczak
- article
- 29th Annual Meeting of Polymer Processing Society (PPS-29), Jul 2013, Nuremberg, Germany
- Accès au bibtex
-
- titre
- Prediction of tensile properties of injection-moulded flax fibre reinforced polypropylene from morphology analysis
- auteur
- Eric Lafranche, Carla Isabel Martins, Vania M. Oliveira, Patricia Krawczak
- article
- 16th International ESAFORM Conference on Material Forming - ESAFORM 2013, Apr 2013, Aveiro, Portugal. pp.1573-1582
- Accès au bibtex
-
- titre
- Odour and VOC emissions from PLA materials: Food packaging and automotive applications
- auteur
- C. Henneuse, A. Cingoz, A. Borcy, Aurélien Piroëlle, Cécile Courgneau, Daniela Rusu, Marie-France Lacrampe, Patricia Krawczak
- article
- 15th Workshop on Odour and Emissions of Plastic Materials, Mar 2013, Kassel, Germany
- Accès au bibtex
-
- titre
- Halloysite nanotubes-polymer nanocomposites: A new class of multifaceted materials
- auteur
- Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- 2nd Annual International Conference on Materials Processing and Characterization (ICMPC 2013), Mar 2013, Hyderabad, India
- Accès au bibtex
-
Book sections
- titre
- Research in collaborative mode
- auteur
- Patricia Krawczak
- article
- Editions PC. The Challenging World of Composites, Part 2 - Chapter 3, JEC Group Publ., pp.144-145, 2013, 979-1090148529
- Accès au bibtex
-
2012
Journal articles
- titre
- Development of poly(lactic acid) cellular materials: Physical and morphological characterizations
- auteur
- J.-M. Julien, J.-C. Bénézet, E. Lafranche, J.-C. Quantin, A. Bergeret, M.-F. Lacrampe, P. Krawczak
- article
- Polymer, 2012, 53 (25), pp.5885 - 5895. ⟨10.1016/j.polymer.2012.10.005⟩
- Accès au texte intégral et bibtex
-
- titre
- The role of strain-induced structural changes on the mechanical behavior of PA6/PE multilayer films under uniaxial drawing
- auteur
- Naïma Sallem-Idrissi, Valérie Gaucher, Adeline Marin, Roland Séguéla, Jean–marc Marc R. Lefebvre, Patricia Krawczak, Marie-France Lacrampe
- article
- Polymer, 2012, 53 (23), pp.5336-5346. ⟨10.1016/j.polymer.2012.09.027⟩
- Accès au bibtex
-
- titre
- Development of Water Blown Bio-Based Thermoplastic Polyurethane Foams
- auteur
- Baralu Jagannatha Rashmi, Daniela Rusu, Kalappa Prashantha, Marie France Lacrampe, Patricia Krawczak
- article
- Advanced Materials Research, 2012, 584, pp.361 - 365. ⟨10.4028/www.scientific.net/AMR.584.361⟩
- Accès au bibtex
-
- titre
- Processing and Mechanical Behaviour of Halloysite Filled Starch Based Nanocomposites
- auteur
- Hélène Schmitt, Kalappa Prashantha, Jeremie Soulestin, Marie France Lacrampe, Patricia Krawczak, Jean Marie Raquez
- article
- Advanced Materials Research, 2012, 584, pp.445 - 449. ⟨10.4028/www.scientific.net/AMR.584.445⟩
- Accès au bibtex
-
- titre
- Preparation and properties of novel melt-blended halloysite nanotubes/wheat starch nanocomposites
- auteur
- Hélène Schmitt, Kalappa Prashantha, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Carbohydrate Polymers, 2012, 89 (3), pp.920-927. ⟨10.1016/j.carbpol.2012.04.037⟩
- Accès au texte intégral et bibtex
-
- titre
- Mechanical and Optical Properties of Polyamide 6/Clay Nanocomposite Cast Films: Influence of the Degree of Exfoliation
- auteur
- Jeremie Soulestin, Baralu J. Rashmi, Serge Bourbigot, Marie-France Lacrampe, Patricia Krawczak
- article
- Macromolecular Materials and Engineering, 2012, 297 (5), pp.444 - 454. ⟨10.1002/mame.201100202⟩
- Accès au bibtex
-
- titre
- Effects of surface treatment and weave structure on interlaminar fracture behaviour of plain glass woven fabric composites: Part II. Report of the 2nd round robin test results
- auteur
- J.K. Kim, M.L. Sham, H. Hamada, Y. Hirai, K. Fujihara, H. Saidpour, M. Sezen, P. Krawczak, R. Bequignat, J. Pabiot, S. Pinter, G. Banhegyl, Y. Yue, K. Padmanabhan, Y. Suzuki, K. Schulte, J. Karger-Kocsis, L. Ye, J. Lesko
- article
- Composite Interfaces , 2012, 9 (2), pp.207 - 218. ⟨10.1163/156855402760116102⟩
- Accès au bibtex
-
- titre
- Development of novel melt-compounded starch-grafted polypropylene/polypropylene-grafted maleic anhydride/organoclay ternary hybrids
- auteur
- Romain Tessier, Eric Lafranche, P. Krawczak
- article
- Express Polymer Letters, 2012, 6 (11), pp.937 - 952. ⟨10.3144/expresspolymlett.2012.99⟩
- Accès au bibtex
-
- titre
- Bioplastics in automotive applications
- auteur
- Daniela Rusu, Séverine A.E. Boyer, Marie-France Lacrampe, Patricia Krawczak
- article
- Bioplastics Magazine, 2012, 7 (1)
- Accès au bibtex
-
- titre
- Effect of injection molding parameters on nanofillers dispersion in masterbatch based PP-clay nanocomposites
- auteur
- J. J. Rajesh, Jérémie Soulestin, Marie-France Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2012, 6 (3), pp.237 - 248. ⟨10.3144/expresspolymlett.2012.26⟩
- Accès au bibtex
-
- titre
- Injection moulding of long glass fibre reinforced poly(ethylene terephtalate): Influence of carbon black and nucleating agents on impact properties
- auteur
- Laura Cilleruelo, Eric Lafranche, P. Krawczak, P. Pardo, Paul Lucas
- article
- Express Polymer Letters, 2012, 6 (9), pp.706 - 718. ⟨10.3144/expresspolymlett.2012.76⟩
- Accès au bibtex
-
- titre
- Poly(lactic acid)/halloysite nanotubes nanocomposites: Structure, thermal, and mechanical properties as a function of halloysite treatment
- auteur
- Kalappa Prashantha, Benoît Lecouvet, Michel Sclavons, Marie France Lacrampe, Patricia Krawczak
- article
- Journal of Applied Polymer Science, 2012, pp.n/a - n/a. ⟨10.1002/app.38358⟩
- Accès au bibtex
-
Conference papers
- titre
- Odour and VOC emissions from PLA materials: Food packaging and automotive applications
- auteur
- A. Cingoz, A. Borcy, C. Henneuse, Aurélien Piroëlle, Cécile Courgneau, Daniela Rusu, Marie-France Lacrampe, R. Salazar, Patricia Krawczak, Violette Ducruet
- article
- 10th Conference on Emissions and Odours from Materials, Oct 2012, Brussels, Belgium
- Accès au bibtex
-
- titre
- Melt compounding of starch grafted polypropylene/organoclay nanocomposites : Effect of PP-g-MA compatibilizer
- auteur
- Romain Tessier, Eric Lafranche, Patricia Krawczak
- article
- Interface 21, Aug 2012, Kyoto, Japan
- Accès au bibtex
-
- titre
- Nouvelles formulations thermoplastiques biosourcées avec Gaïalène et nanocharges pour l'industrie automobile
- auteur
- L. Mentink, Eric Lafranche, V. Faggion, Patricia Krawczak
- article
- Congrès international Matériaux Polymères et Industrie Automobile 2012 "Matériaux Avancés Polymères et Composites", SFIP / SIA / Mines Douai, Jun 2012, Douai, France
- Accès au bibtex
-
- titre
- Odour and VOC emissions from PLA materials: Effect of processing
- auteur
- A. Cingoz, A. Borcy, C. Henneuse, Aurélien Piroëlle, Daniela Rusu, Salazar R., Patricia Krawczak, Violette Ducruet
- article
- 2nd International Meeting on Material/Bioproduct Interaction - MATBIM 2012, Apr 2012, Dijon, France
- Accès au bibtex
-
- titre
- New class of polymer nanocomposites reinforced by halloysite nanotubes: An alternative to layered silicates and carbon nanotubes ?
- auteur
- Kalappa Prashantha, Hélène Schmitt, Marie-France Lacrampe, Patricia Krawczak
- article
- International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
- Accès au bibtex
-
- titre
- Development of water blown bio-based thermoplastic polyurethane foams
- auteur
- Baralu Jagannatha Rashmi, Daniela Rusu, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
- Accès au bibtex
-
- titre
- Processing and mechanical behaviour of halloysite filled starch-based nanocomposites
- auteur
- Hélène Schmitt, Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak, Jean-Marie Raquez
- article
- International Conference on Recent Trends in Advanced Materials (ICRAM-2012), Feb 2012, Vellore, India
- Accès au bibtex
-
2011
Journal articles
- titre
- Mechanical behaviour and essential work of fracture of halloysite nanotubes filled polyamide 6 nanocomposites
- auteur
- K. Prashantha, H. Schmitt, M.F. Lacrampe, P. Krawczak
- article
- Composites Science and Technology, 2011, 71 (16), pp.1859 - 1866. ⟨10.1016/j.compscitech.2011.08.019⟩
- Accès au bibtex
-
- titre
- Modeling of high speed RTM injection with highly reactive resin with on-line mixing
- auteur
- Mylène Deléglise, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak, Bruce Claude
- article
- Composites Part A: Applied Science and Manufacturing, 2011, 42 (10), pp.1390-1397. ⟨10.1016/j.compositesa.2011.06.002⟩
- Accès au texte intégral et bibtex
-
- titre
- One-step water-assisted melt-compounding of polyamide 6/pristine clay nanocomposites: An efficient way to prevent matrix degradation
- auteur
- F. Touchaleaume, J. Soulestin, M. Sclavons, J. Devaux, M.F. Lacrampe, P. Krawczak
- article
- Polymer Degradation and Stability, 2011, 96 (10), pp.1890 - 1900. ⟨10.1016/j.polymdegradstab.2011.07.005⟩
- Accès au bibtex
-
- titre
- Processing and characterization of halloysite nanotubes filled polypropylene nanocomposites based on a masterbatch route: effect of halloysites treatment on structural and mechanical properties
- auteur
- Kalappa Prashantha, Marie-France Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2011, 5 (4), pp.295 - 307. ⟨10.3144/expresspolymlett.2011.30⟩
- Accès au bibtex
-
- titre
- Efficient one-step melt-compounding of copolyetheramide/pristine clay nanocomposites using water-injection as intercalating/exfoliating aid
- auteur
- François Touchaleaume, Jérémie Soulestin, Michel Sclavons, Jacques Devaux, F. Cordenier, P. van Velthem, J. Flat, Marie-France Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2011, 5 (12), pp.1085 - 1101. ⟨10.3144/expresspolymlett.2011.106⟩
- Accès au bibtex
-
- titre
- Recycling of thermoset structural composites: would textile technology bring a high added-value solution ?
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2011, 5 (10), pp.838 - 838. ⟨10.3144/expresspolymlett.2011.82⟩
- Accès au bibtex
-
Conference papers
- titre
- Development of bio‐based cellular materials
- auteur
- Jean Mario Julien, Jean-Charles Bénézet, Eric Lafranche, Jean-Christophe Quantin, Anne Bergeret, Marie-France Lacrampe, Patricia Krawczak
- article
- XIIIème Congrès de la Société Française de Génie des Procédés, Société Française de Génie des Procédés (SFGP), Nov 2011, Lille, France
- Accès au bibtex
-
- titre
- Impact de la mise en forme de polylactide sur l'émission de COVs
- auteur
- Aurélien Piroëlle, Daniela Rusu, Marie-France Lacrampe, Patricia Krawczak, Catherine Henneuse, Violette V. Ducruet
- article
- 39èmes Journées d'Etudes des Polymères (JEPO 39), Groupe Français d’Études et d’Applications des Polymères (GFP), Oct 2011, Eppe-Sauvage, France
- Accès au bibtex
-
- titre
- Development of Poly(Lactic Acid) cellular materials: modifications induced by X-Ray irradiation and chain extenders
- auteur
- J.M. Julien, Jean-Charles Bénézet, Jean-Christophe Quantin, Eric Lafranche, Anne Bergeret, Marie-France Lacrampe, Patricia Krawczak
- article
- 3rd International Conference on Biofoams (Biofoams 2011), Sep 2011, Capri, Italy
- Accès au bibtex
-
- titre
- Elaboration et comportement mécanique de nanocomposites polyamide-6 / halloysite
- auteur
- Kalappa Prashantha, Hélène Schmitt, Marie-France Lacrampe, Patricia Krawczak
- article
- 10ème Colloque Franco-Roumain sur les Polymères (CFR2011) "Polymères & Matériaux Avancés: Développement Durable et Performances" , Sep 2011, Douai, France
- Accès au bibtex
-
- titre
- Peculiar crystallization behaviour of injection-molded PLA parts
- auteur
- R. Ramy-Ratiarison, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- BIOPOL-2011, 3rd International Conference on Biobased and Biodegradable Polymers, Aug 2011, Strasbourg, France
- Accès au bibtex
-
- titre
- Processing and mechanical behaviour of halloysite filled polyamide-6 nanocomposites
- auteur
- Kalappa Prashantha, Hélène Schmitt, Marie-France Lacrampe, Patricia Krawczak
- article
- 18th International Conference on Composites Materials (ICCM-2011), Aug 2011, Jeju Island, South Korea. TH25-2, 5p
- Accès au bibtex
-
- titre
- Mélanges Nanocomposites Polypropylène/Polyamide 6/Montmorillonite : Effet des nanocharges sur la morphologie et les propriétés mécaniques résultantes
- auteur
- David Lemény, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak, Fouad Laoutid, Skander Khélifi
- article
- 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.179
- Accès au texte intégral et bibtex
-
- titre
- Influence of the dispersion degree on the mechanical properties of polyamide 6 nanocomposites films
- auteur
- Jeremie Soulestin, Sébastien Alix, Baralu Jagannatha Rashmi, Serge Bourbigot, Marie-France Lacrampe, Patricia Krawczak
- article
- 27th Annual Meeting of Polymer Processing Society (PPS-27), May 2011, Marrakesh, Morocco. Paper N°OP-3-1139-F, pp 175-180
- Accès au bibtex
-
Book sections
- titre
- Recycling of composite materials
- auteur
- Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM5895, 2011, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5895⟩
- Accès au bibtex
-
- titre
- Chapter 4. Bioplastic based nanocomposites for packaging applications
- auteur
- Jeremie Soulestin, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- Srikanth Pilla. Handbook of Bioplastics & Biocomposites Engineering Applications, Wiley-Scrivener, pp.77-120, 2011, 978-0470626078 ⟨10.1002/9781118203699.ch4⟩
- Accès au bibtex
-
- titre
- Chapter 15. Bioplastics and vegetal fibre reinforced bioplastics in automotive applications
- auteur
- Daniela Rusu, Séverine A.E. Boyer, Marie-France Lacrampe, Patricia Krawczak
- article
- Srikanth Pilla. Handbook of Bioplastics & Biocomposites Engineering Applications, Wiley-Scrivener pp.397-448, 2011, 978-0470626078. ⟨10.1002/9781118203699.ch15⟩
- Accès au bibtex
-
2010
Journal articles
- titre
- A constitutive model for semi-crystalline polymers at high temperature and finite plastic strain: Application to PA6 and PE biaxial stretching
- auteur
- Fanfei Zeng, Philippe Le Grognec, Marie-France Lacrampe, Patricia Krawczak
- article
- Mechanics of Materials, 2010, 42 (7), pp.686 - 697. ⟨10.1016/j.mechmat.2010.04.006⟩
- Accès au texte intégral et bibtex
-
- titre
- Thermosetting (bio)materials derived from renewable resources: A critical review
- auteur
- Jean-Marie Raquez, Mylène Deléglise, Marie-France Lacrampe, P. Krawczak
- article
- Progress in Polymer Science, 2010, 35 (4), pp.487 - 509. ⟨10.1016/j.progpolymsci.2010.01.001⟩
- Accès au bibtex
-
- titre
- Optimization of polyethylene/binder/polyamide extrusion blow-molded films. III. Slippability improvement with fatty acid amides
- auteur
- Charles Poisson, Vincent Hervais, Marie-France Lacrampe, P. Krawczak, Thierry Falher, Christian Gondard, Vincent Ferreiro
- article
- Journal of Applied Polymer Science, 2010, 115 (4), pp.2332 - 2345. ⟨10.1002/app.30110⟩
- Accès au bibtex
-
- titre
- Polymer-based functionally graded materials (FGMs): potential and challenges
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2010, 4 (6), pp.328 - 328. ⟨10.3144/expresspolymlett.2010.41⟩
- Accès au bibtex
-
- titre
- Influence of water content, time, and temperature on the rheological behavior of polyethylene terephtalate
- auteur
- A. Souza, Sophie Dropsit-Leprêtre, Nicole Demarquette, Marie-France Lacrampe, P. Krawczak
- article
- Journal of Applied Polymer Science, 2010, pp.NA - NA. ⟨10.1002/app.31885⟩
- Accès au bibtex
-
Conference papers
- titre
- Interfacial properties - crystallisation kinetics - morphologies' relationship in PET/polyolefins systems
- auteur
- Sophie Dropsit-Leprêtre, Maryse Bacquet, Séverine A.E. Boyer, Marie-France Lacrampe, Patricia Krawczak
- article
- Europe/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S07-12, pp 131
- Accès au bibtex
-
- titre
- Influence of the dispersion degree on the in-use properties of polyamide 6 nanocomposites films
- auteur
- Jeremie Soulestin, Baralu Jagannatha Rashmi, Serge Bourbigot, Marie-France Lacrampe, Patricia Krawczak
- article
- Europe/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S11-98, pp 202
- Accès au bibtex
-
- titre
- Modeling of thermal oxidation of a polypropylene stabilized with phosphonite during rotational moulding
- auteur
- Salah Sarrabi, Marie-France Lacrampe, Patricia Krawczak
- article
- Europe/Africa Regional Meeting of the Polymer Processing Society 2010 (E/A RM PPS 2010), Oct 2010, Istanbul, Turkey. Paper N°S01-6, pp 56
- Accès au bibtex
-
- titre
- Development of poly(lactid acid) cellular materials: Physical and morphological characterizations
- auteur
- J.M. Julien, Jean-Charles Bénézet, Jean-Christophe Quantin, Eric Lafranche, Anne Bergeret, Marie-France Lacrampe, Patricia Krawczak
- article
- MoDeSt 2010, 6th International Conference on Modification, Degradation and Stabilization of Polymers, Sep 2010, Athens, Greece
- Accès au bibtex
-
- titre
- Experimental study and modeling of the mechanical behaviour of angle-interlock composites
- auteur
- Patrick Lapeyronnie, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak, François Boussu
- article
- Congrès International Carrosserie et Plastiques 2010, "Composites et Polymères à Haut Module", SFIP / SIA / Mines Douai, Jun 2010, Douai, France
- Accès au bibtex
-
- titre
- Modelling of the rheological behaviour in thermoplastic composite consolidation process
- auteur
- Hui Wu, Christophe Binetruy, Mylene Deleglise, Patricia Krawczak
- article
- 14th European Conference on Composite Materials (ECCM-14), Jun 2010, Budapest, Hungary
- Accès au bibtex
-
- titre
- Polymer nanocomposites based on unmodified Montmorillonite: Water assisted extrusion
- auteur
- François Touchaleaume, F. Cordenier, Michel Sclavons, Jeremie Soulestin, Jacques Devaux, P. van Velthem, Marie-France Lacrampe, Patricia Krawczak
- article
- 14th European Conference on Composite Materials (ECCM 14), Jun 2010, Budapest, Hungary
- Accès au bibtex
-
2009
Journal articles
- titre
- A new elaboration concept of polypropylene/unmodified Montmorillonite nanocomposites by reactive extrusion based on direct injection of polypropylene aqueous suspensions
- auteur
- Madiha Aloui, Jérémie Soulestin, Marie-France Lacrampe, Patricia Krawczak, Dimitri Rousseaux, Jacqueline Marchand-Brynaert, Jacques Devaux, Nicolas Quiévy, Michel Sclavons
- article
- Polymer Engineering and Science, 2009, 49 (11), pp.2276-2285. ⟨10.1002/pen.21474⟩
- Accès au texte intégral et bibtex
-
- titre
- Trichroic infrared analysis of the strain-induced structural changes in the PA6 layer of PA6/PE multilayer films under biaxial drawing
- auteur
- N. Sallem-Idrissi, V. Miri, S. Elkoun, P. Krawczak, Marie-France Lacrampe, J.-M. Lefebvre, Roland Seguela
- article
- Polymer, 2009, 50 (24), pp.5812 - 5823. ⟨10.1016/j.polymer.2009.09.052⟩
- Accès au bibtex
-
- titre
- Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure
- auteur
- J. Guilleminot, S. Comas-Cardona, D. Kondo, C. Binetruy, P. Krawczak
- article
- Composites Science and Technology, 2009, 68 (7-8), pp.1777. ⟨10.1016/j.compscitech.2008.02.005⟩
- Accès au texte intégral et bibtex
-
- titre
- Coupling filtration and flow during liquid composite molding: Experimental investigation and simulation
- auteur
- Delphine Lefevre, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- Composites Science and Technology, 2009, 69 (13), pp.2127-2134. ⟨10.1016/j.compscitech.2009.05.008⟩
- Accès au texte intégral et bibtex
-
- titre
- Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties
- auteur
- Kalappa Prashantha, Jérémie Soulestin, Marie-France Lacrampe, P. Krawczak, G. Dupin, M. Claes
- article
- Composites Science and Technology, 2009, 69 (11-12), pp.1756 - 1763. ⟨10.1016/j.compscitech.2008.10.005⟩
- Accès au bibtex
-
- titre
- Computational and experimental analysis of fusion bonding in thermoplastic composites: Influence of process parameters
- auteur
- Julia Schell, Johann Guilleminot, Christophe Binetruy, P. Krawczak
- article
- Journal of Materials Processing Technology, 2009, 209 (11), pp.5211 - 5219. ⟨10.1016/j.jmatprotec.2009.03.008⟩
- Accès au bibtex
-
- titre
- Present Status and Key Challenges of Carbon Nanotubes Reinforced Polyolefins: A Review on Nanocomposites Manufacturing and Performance Issues
- auteur
- K. Prashantha, J. Soulestin, M.F. Lacrampe, P. Krawczak
- article
- Polymers and Polymer Composites, 2009, 17 (4), pp.205-245. ⟨10.1177/096739110901700402⟩
- Accès au bibtex
-
- titre
- Plastics' key role in energy-efficient building
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2009, 3 (12), pp.752 - 752. ⟨10.3144/expresspolymlett.2009.93⟩
- Accès au bibtex
-
- titre
- Polymer-based sensors: A high potentiel to be further developed
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2009, 3 (7), pp.400 - 400. ⟨10.3144/expresspolymlett.2009.49⟩
- Accès au bibtex
-
- titre
- Taguchi analysis of shrinkage and warpage of injection-moulded polypropylene/multiwall carbon nanotubes nanocomposites
- auteur
- Kalappa Prashantha, Jérémie Soulestin, Marie-France Lacrampe, Eric Lafranche, P. Krawczak, G. Dupin, M. Claes
- article
- Express Polymer Letters, 2009, 3 (10), pp.630 - 638. ⟨10.3144/expresspolymlett.2009.79⟩
- Accès au bibtex
-
- titre
- Present status and key challenges of carbon nanotubes reinforced polyolefins: A review on nanocomposites manufacturing and performance issues
- auteur
- Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymers and Polymer Composites, 2009, 17 (4), pp.205-245
- Accès au bibtex
-
- titre
- Characterization of extrusion flow using particle image velocimetry
- auteur
- J. Fournier, M. Lacrampe, P. Krawczak
- article
- Express Polymer Letters, 2009, 3 (9), pp.569 - 578. ⟨10.3144/expresspolymlett.2009.71⟩
- Accès au bibtex
-
Conference papers
- titre
- A constitutive model for semi-crystalline polymer films in finite elastoplastic strains
- auteur
- Fanfei Zeng, Philippe Le Grognec, Marie-France Lacrampe, Patricia Krawczak
- article
- Europe/Africa Regional Meeting of the Polymer Processing Society 2009 (E/A RM PPS 2009), Oct 2009, Larnaca, Cyprus. pp.Conf.n° 005
- Accès au bibtex
-
- titre
- Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: From processing to usage properties
- auteur
- Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak, G. Dupin, M. Claes
- article
- 9ème Colloque Franco-Roumain sur les Polymères, "Synthèse et Propriétés des Polymères : Les Polymères et l'Environnement", Sep 2009, Alba Iulia, Romania
- Accès au bibtex
-
- titre
- Electric and dielectrical properties of carbon nanotube filled polypropylene nanocomposites
- auteur
- Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak, G. Dupin, M. Claes, A. Tewari
- article
- 3rd International Conference on Structural Analysis of Advanced Materials (ICSAAM 2009), Sep 2009, Tarbes, France
- Accès au bibtex
-
- titre
- Nanocomposites from unmodified clay and copolyetheramide by water-assisted melt processing
- auteur
- François Touchaleaume, Michel Sclavons, Jeremie Soulestin, Jacques Devaux, F. Cordenier, P. van Velthem, Marie-France Lacrampe, Patricia Krawczak
- article
- 7th Eurofillers Congress (EUROFILLERS 2009) "From macro to nanofillers for structural and functional polymer materials", Jun 2009, Turin, Italy
- Accès au bibtex
-
- titre
- Overall characterization of cellulose fiber reinforced PLA
- auteur
- J. Kovacs, Jeremie Soulestin, R. Ramy-Ratiarison, Eric Lafranche, Marie-France Lacrampe, Tibor Czigany, Patricia Krawczak
- article
- 4th China-Europe Symposium on Processing and Properties of Reinforced Polymers, Jun 2009, Guilin, China
- Accès au bibtex
-
- titre
- Homogenization of the mechanical behavior of a layer-to-layer angle-interlock composite
- auteur
- Patrick Lapeyronnie, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak, François Boussu
- article
- SAMPE Europe 2009, Mar 2009, Paris, France
- Accès au bibtex
-
- titre
- Injection moulding of flax fibre-reinforced polypropylene: Influence of processing conditions on tensile and impact strengths
- auteur
- K. Senthil Kumar, Eric Lafranche, Marie-France Lacrampe, Patricia Krawczak
- article
- 25th Annual Meeting of the Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper N°GS-III:OP7
- Accès au bibtex
-
- titre
- Non destructive evaluation of processing-induced residual stresses in amorphous thermoplastic injection-mouldings,
- auteur
- Dawei Jia, Gérard Bourse, Salim Chaki, Marie-France Lacrampe, Patricia Krawczak, Claude Robin
- article
- 25th Annual Meeting of the Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper n°N°GS-IX:OP3
- Accès au bibtex
-
- titre
- Injection moulding of cellular thermoplastics: Properties tailoring through process parameters control
- auteur
- Hassane Boudhani, P. Le Gargasson, E. Lafranche, Marie-France Lacrampe, Patricia Krawczak
- article
- 25th Annual Meeting of Polymer Processing Society (PPS-25), Mar 2009, Goa, India. Paper n°N°TS-I:OP1
- Accès au bibtex
-
Poster communications
- titre
- Development of poly(lactic acid) cellular materials: physical and morphological characterization
- auteur
- J.M. Julien, Jean-Charles Bénézet, Eric Lafranche, Jean-Christophe Quantin, Anne Bergeret, Marie-France Lacrampe, Patricia Krawczak
- article
- 2nd International Conference on Biofoams (Biofoams 2009), Oct 2009, Niagara Falls, Canada
- Accès au texte intégral et bibtex
-
2008
Journal articles
- titre
- Evaluation par émission acoustique de l'intégrité de réservoirs composites GNV
- auteur
- Olivier Skawinski, Patrice Hulot, Christophe Binetruy, Patricia Krawczak, Christian Rasche, Richard Gattin
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2008, 18 (3), pp.273 - 292. ⟨10.3166/RCMA.18.273-292⟩
- Accès au bibtex
-
- titre
- Crystallization Kinetics and Crystal Structure of Nylon6-Clay Nanocomposites: Combined Effects of Thermomechanical History, Clay Content, and Cooling Conditions
- auteur
- V. Miri, S. Elkoun, F. Peurton, C. Vanmansart, J.-M. Lefebvre, P. Krawczak, Roland Seguela
- article
- Macromolecules, 2008, 41 (23), pp.9234 - 9244. ⟨10.1021/ma801804y⟩
- Accès au bibtex
-
- titre
- Dynamic void content prediction during radial injection in liquid composite molding
- auteur
- Boris Gourichon, Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2008, 39 (1), pp.46 - 55. ⟨10.1016/j.compositesa.2007.09.008⟩
- Accès au bibtex
-
- titre
- Developing French/Indian academic cooperation
- auteur
- Patricia Krawczak, Stéphane Panier
- article
- JEC Composites Magazine, 2008, 43, pp.23-24
- Accès au bibtex
-
- titre
- Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: Improvement of dispersion and mechanical properties through PP-g-MA addition
- auteur
- Kalappa Prashantha, Jérémie Soulestin, Marie-France Lacrampe, M. Claes, G. Dupin, P. Krawczak
- article
- Express Polymer Letters, 2008, 2 (10), pp.735 - 745. ⟨10.3144/expresspolymlett.2008.87⟩
- Accès au bibtex
-
- titre
- Plastics and composites based on renewable resources: end-of-life recycling and recovery issues
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2008, 2 (4), pp.237 - 237. ⟨10.3144/expresspolymlett.2008.28⟩
- Accès au bibtex
-
- titre
- Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure
- auteur
- J. Guilleminot, S. Comas-Cardona, Djimedo Kondo, C. Binetruy, P. Krawczak
- article
- Composites Science and Technology, 2008, 68 (7-8), pp.1777-1786. ⟨10.1016/j.compscitech.2008.02.005⟩
- Accès au bibtex
-
Conference papers
- titre
- Relation morphologie-propriétés mécaniques ultimes des mélanges compatibilisés PET recyclé/polyoléfines
- auteur
- Sophie Dropsit-Leprêtre, Marie-France Lacrampe, Jean-Pierre Tancrez, Patricia Krawczak
- article
- Journée Scientifique et Technique (JST) AMAC/MECAMAT "Eco-Matériaux", Associatin pour les Matériaux Composites (AMAC); Association MECAMAT, Oct 2008, Amiens, France
- Accès au bibtex
-
- titre
- Influence of textile architectures on the compaction and saturated permeability spatial variations
- auteur
- Sébastien Comas-Cardona, Simon Bickerton, Mylene Deleglise, W. Walbran, Christophe Binetruy, Patricia Krawczak
- article
- 9 th International Conference on Textile Composites (TEXCOMP-9), Oct 2008, Newark, Delaware, United States. pp.3-10
- Accès au bibtex
-
- titre
- Spatial compaction and saturated permeability spacial variations of fibre reinforcements
- auteur
- Simon Bickerton, Sébastien Comas-Cardona, I. Razali, Mylene Deleglise, W. Walbran, Christophe Binetruy, Patricia Krawczak
- article
- 9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
- Accès au bibtex
-
- titre
- Highly reactive resin viscosity prediction in Liquid Composite Molding processes
- auteur
- Mylene Deleglise, Philippe Le Grognec, Bruce Claude, D. Wilde, Christophe Binetruy, Patricia Krawczak
- article
- 9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
- Accès au bibtex
-
- titre
- Measurement of permeability of woven jute fabrics and evaluation of mechanical properties of the jute fabric-reinforced composites
- auteur
- H. Hamada, A. Nakai, Y. Takinishi, A. Sahoo, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
- Accès au bibtex
-
- titre
- Numerical prediction of meso-scale voids in Liquid Composite Moulding including variability study
- auteur
- Julia Schell, Mylene Deleglise, Christophe Binetruy, Patricia Krawczak, Paolo Ermanni
- article
- 9th International Conference on Flow Processes in Composite Materials (FPCM-9), Jul 2008, Montréal, Canada
- Accès au bibtex
-
- titre
- Multi-walled carbon nanotube filled polypropylene nanocomposites based on a masterbatch route: Optimization of CNTs dispersion
- auteur
- Jeremie Soulestin, Kalappa Prashantha, Marie-France Lacrampe, Patricia Krawczak
- article
- 24th Annual Meeting of Polymer Processing Society (PPS-24), Jun 2008, Salerno, Italy. Paper n°S18-961
- Accès au bibtex
-
- titre
- Polypropylene nanocomposites based on aqueous eemulsions and unmodified Montmorillonite elaborated by reactive extrusion
- auteur
- Jeremie Soulestin, Madiha Aloui, Dimitri Rousseaux, Michel Sclavons, N. Quiévy, Jacques Devaux, Marie-France Lacrampe, Patricia Krawczak
- article
- 24th Annual Meeting of Polymer Processing Society (PPS-24), Jun 2008, Salerno, Italy. Paper n°S18-960
- Accès au bibtex
-
- titre
- Optimisation par le biais de la simulation numérique du moulage RTM haute cadence de pièces composites automobiles
- auteur
- Mylene Deleglise, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak, Bruce Claude, D. Wilde, A. Terenzi, J. Kenny
- article
- Congrès International Carrosserie et Plastiques 2008 "Nouvelles Exigences de la Carrosserie Automobile et de ses Equipements", SFIP / SIA / Mines Douai, Jun 2008, Douai, France
- Accès au bibtex
-
- titre
- Injection de nanocomposites PP/argile à base de mélanges maîtres concentrés: Relation entre dispersion de la nanocharge et paramètres de moulage
- auteur
- J.J. Rajesh, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Journée UGéPE Nord Pas-de-Calais, May 2008, Lille, France
- Accès au bibtex
-
- titre
- Micromechanical modelling of a composite reinforced foam core of a 3D sandwich structure
- auteur
- Johann Guilleminot, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 8th International Conference on Sandwich Structures (ICSS-8), May 2008, Porto, Portugal
- Accès au bibtex
-
- titre
- Modeling of the injection of an automotive part with a two component highly reactive resin with on-line mixing in RTM
- auteur
- Mylène Deléglise, Philippe Le Grognec, Bruce Claudé, Dirk Wilde, Andrea Terenzi, José M. Kenny, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe 2008, Mar 2008, Paris, France
- Accès au bibtex
-
- titre
- Masterbatch-based PP/clay nanocomposite injection mouldings : relationship between nanoclay dispersion and processing parameters
- auteur
- J.J. Rajesh, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- Asian Polymer Association (APA) International Conference on "Advances in Polymer Science & Technology", POLY-2008, Jan 2008, New Delhi, India
- Accès au bibtex
-
2007
Journal articles
- titre
- Numerical prediction and experimental characterisation of meso-scale-voids in liquid composite moulding
- auteur
- J.S.U. Schell, M. Deleglise, C. Binetruy, P. Krawczak, P. Ermanni
- article
- Composites Part A: Applied Science and Manufacturing, 2007, 38 (12), pp.2460 - 2470. ⟨10.1016/j.compositesa.2007.08.005⟩
- Accès au bibtex
-
- titre
- Modelling the flow of particle-filled resin through a fibrous preform in liquid composite molding technologies
- auteur
- Delphine Lefèvre, Sébastien Comas-Cardona, Christophe Binétruy, Patricia Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2007, 38 (10), pp.2154 - 2163. ⟨10.1016/j.compositesa.2007.06.008⟩
- Accès au texte intégral et bibtex
-
- titre
- Use of non local equilibrium theory to predict transient temperature during non-isothermal resin flow in a fibrous medium
- auteur
- Mylene Deleglise, Christophe Binetruy, Philippe Castaing, Patricia Krawczak
- article
- International Journal of Heat and Mass Transfer, 2007, 50 (11-12), pp.2317 - 2324. ⟨10.1016/j.ijheatmasstransfer.2006.10.020⟩
- Accès au bibtex
-
- titre
- A micromechanical analysis of a local failure criterion for particle-reinforced composites
- auteur
- Johann Guilleminot, Djimedo Kondo, Christophe Binetruy, Stephane Panier, Said Hariri, Patricia Krawczak
- article
- Composites Science and Technology, 2007, 67 (11-12), pp.2384. ⟨10.1016/j.compscitech.2007.01.002⟩
- Accès au texte intégral et bibtex
-
- titre
- Unidirectional compression of fibre reinforcements. Part 1: A non-linear elastic-plastic behaviour
- auteur
- Sébastien Comas-Cardona, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak
- article
- Composites Science and Technology, 2007, 67 (3-4), pp.507-514. ⟨10.1016/j.compscitech.2006.08.017⟩
- Accès au texte intégral et bibtex
-
- titre
- Unidirectional compression of fibre reinforcements. Part 2: A continuous permeability tensor measurement
- auteur
- S. Comas-Cardona, C. Binetruy, P. Krawczak
- article
- Composites Science and Technology, 2007, 67 (3-4), pp.638 - 645. ⟨10.1016/j.compscitech.2006.07.020⟩
- Accès au bibtex
-
- titre
- Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties
- auteur
- E. Lafranche, P. Krawczak, J. Ciolczyk, J. Maugey
- article
- Express Polymer Letters, 2007, 1 (7), pp.456 - 466. ⟨10.3144/expresspolymlett.2007.64⟩
- Accès au bibtex
-
- titre
- Unidirectional compression of fiber reinforcements. Part 2: A continuous permeability tensor measurement
- auteur
- Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- Composites Science and Technology, 2007, 67 (3-4), pp.638-645. ⟨10.1016/j.compscitech.2006.07.020⟩
- Accès au texte intégral et bibtex
-
- titre
- Compounding and processing of polymer nanocomposites: from scientific challenges to industrial stakes
- auteur
- P. Krawczak
- article
- Express Polymer Letters, 2007, 1 (4), pp.188 - 188. ⟨10.3144/expresspolymlett.2007.29⟩
- Accès au bibtex
-
- titre
- A micromechanical analysis of a local failure criterion for particle-reinforced composites
- auteur
- Johann Guilleminot, Djimedo Kondo, Christophe Binetruy, Stéphane Panier, Saïd Hariri, Patricia Krawczak
- article
- Composites Science and Technology, 2007, 67 (11-12), pp.2384-2389. ⟨10.1016/j.compscitech.2007.01.002⟩
- Accès au bibtex
-
Conference papers
- titre
- Modeling, monitoring and control of composite structures processing
- auteur
- Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 5th Korea-France Joint Workshop on Composite Materials: Smart Structures and Process for Aerospace Structures, Dec 2007, Daejon, South Korea
- Accès au bibtex
-
- titre
- Analyse du renforcement du polycarbonate par des terpolymères blocs nanostructurés
- auteur
- Vincent Dubromez, E. Lafranche, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
- article
- 21ème colloque National "DÉformation des POlymères Solides" (DEPOS-21), Oct 2007, Lille, France
- Accès au bibtex
-
- titre
- Biétirage de films multicouches PA6/PE: Compréhension des mécanismes de déformation de PA6 via le suivi de l'évolution structurale par trichroïsme infrarouge
- auteur
- N. Sallem-Idrissi, Valérie Miri, Saïd Elkoun, Roland Séguéla, Jean Marc Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- 21ème colloque National "DÉformation des POlymères Solides" (DEPOS-21), Oct 2007, Lille, France
- Accès au bibtex
-
- titre
- Experimental and numerical investigation of the elastoplastic behaviour of fibrous preform during the infusion process
- auteur
- T.T. Dang Huu, Mylene Deleglise, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 8th Seminar on Experimental Techniques and Design in Composite Materials (ETDCM8), Oct 2007, Castiadas, Italy
- Accès au bibtex
-
- titre
- Compounding of masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: assessment of rheological and mechanical properties
- auteur
- Kalappa Prashantha, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak, G. Dupin, M. Claes
- article
- 8th Seminar on Experimental Techniques and Design in Composite Materials (ETDCM8), Oct 2007, Castiadas, Italy
- Accès au bibtex
-
- titre
- Stochastic modeling of resin flow in fibrous media in liquid composite molding
- auteur
- J. Guilleminot, Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- 16th International Conference on Composite Materials (ICCM-16), Jul 2007, Kyoto, Japan
- Accès au bibtex
-
- titre
- Theorical and experimental study of the in-plane 1D-flow of particle-filled resin through a fibrous preform
- auteur
- Delphine Lefèvre, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 16th International Conference on Composite Materials (ICCM-16), K. Kageyama, T. Ishikawa, N. Takeda, M. Hojo, S. Sugimoto & T. Ogasawara (Eds.), Jul 2007, Kyoto, Japan
- Accès au bibtex
-
- titre
- Investigation on the flow of particle-filled resin through a fibrous preform in LCM processes
- auteur
- Delphine Lefèvre, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE North America 2007, Jun 2007, Baltimore, Maryland, United States
- Accès au bibtex
-
- titre
- Crystallization of poly(ethylene terephtalate) (PET) in PET/polyolefins blends
- auteur
- Sophie Dropsit-Leprêtre, Jeremie Soulestin, Marie-France Lacrampe, Maryse Bacquet, Patricia Krawczak
- article
- 23rd Annual Meeting of Polymer Processing Society (PPS-23), May 2007, Salvador, Brazil. Paper n°P12-017
- Accès au bibtex
-
- titre
- Dimensional accuracy and stability of polypropylene-clay nanocomposites injection-mouldings
- auteur
- Sylvie Fourdrin, Jeremie Soulestin, Eric Lafranche, Marie-France Lacrampe, Patricia Krawczak
- article
- 23rd Annual Meeting of Polymer Processing Society (PPS-23), May 2007, Salvador, Brazil. Paper n°P03-040
- Accès au bibtex
-
- titre
- Structure-mechanical property relationships of PE/PA6 multilayer blown films
- auteur
- N. Sallem-Idrissi, Valérie Miri, Saïd Elkoun, Roland Séguéla, J.M. Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- 23rd Annual Meeting of Polymer Processing Society (PPS-23), May 2007, Salvador, Brazil. Paper n°P06-014
- Accès au bibtex
-
- titre
- Flow of particle-filled resin through a fibrous preform in Liquid Composite Molding
- auteur
- Delphine Lefèvre, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe 2008, Apr 2007, Paris, France
- Accès au bibtex
-
- titre
- Process-modelling based approach for mechanical probabilistic assessment of composite laminates
- auteur
- Johann Guilleminot, Djimedo Kondo, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe 2007, Apr 2007, Paris, France
- Accès au bibtex
-
- titre
- Les composites dans le transport: Etude de la filtration des charges ignifugeantes par le renfort textile lors de la fabrication de pièces
- auteur
- Christophe Binetruy, Delphine Lefèvre, Patricia Krawczak
- article
- 2ème Convention Européenne des Textiles Techniques, Jan 2007, Lille, France
- Accès au bibtex
-
Book sections
- titre
- Chapter 9: Reduction of starch hydrophilicity by grafting lignin derivatives under electron beam radiation: a study of model compounds
- auteur
- M. Froment, C. Gors, Fréderic Cazaux, X. Coqueret, S. Lepifre, Stéphanie Baumberger, Catherine Lapierre, C. Linz, M.-F. Lacrampe, Patricia Krawczak
- article
- V. Yuryev, P. Tomasik and E. Bertoft. Starch: Achievements in Understanding of Structure and Functionality, Nova Science Publishers, pp.167-178, 2007, 978-1-60021-227-7
- Accès au bibtex
-
2006
Journal articles
- titre
- A new numerical procedure to predict dynamic void content in liquid composite molding
- auteur
- B. Gourichon, C. Binetruy, P. Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2006, 37 (11), pp.1961 - 1969. ⟨10.1016/j.compositesa.2005.12.017⟩
- Accès au bibtex
-
- titre
- Erratum to “Solution to filling time prediction issues for constant pressure driven injection in RTM” [Composites Part A 36 (2005) 339–344]
- auteur
- Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2006, 37 (10), ⟨10.1016/j.compositesa.2006.02.011⟩
- Accès au bibtex
-
- titre
- Optimization of PE/binder/PA extrusion blow-molded films. II. Adhesion properties improvement using binder/EVA blends
- auteur
- C. Poisson, V. Hervais, M. Lacrampe, P. Krawczak
- article
- Journal of Applied Polymer Science, 2006, 101 (1), pp.118 - 127. ⟨10.1002/app.22407⟩
- Accès au bibtex
-
- titre
- Simulation of LCM processes involving induced or forced deformations
- auteur
- M. Deleglise, C. Binetruy, P. Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2006, 37 (6), pp.874 - 880. ⟨10.1016/j.compositesa.2005.04.005⟩
- Accès au bibtex
-
- titre
- Experimental investigation of high fiber tow count fabric unsaturation during RTM
- auteur
- B. Gourichon, C. Binetruy, P. Krawczak
- article
- Composites Science and Technology, 2006, 66 (7-8), pp.976 - 982. ⟨10.1016/j.compscitech.2005.07.032⟩
- Accès au bibtex
-
- titre
- Optimization of PE/Binder/PA extrusion blow-molded films. I. Heat sealing ability improvement using PE/EVA blends
- auteur
- C. Poisson, V. Hervais, M. Lacrampe, P. Krawczak
- article
- Journal of Applied Polymer Science, 2006, 99 (3), pp.974 - 985. ⟨10.1002/app.22405⟩
- Accès au bibtex
-
- titre
- Adaptive process control for thermoplastic injection moulding machines : relationship between control mode, weight, dimensions and impact toughness
- auteur
- N. Havard, J.-E. Fournier, M. Lacrampe, M. Ryckebusch, P. Krawczak
- article
- Journal of Polymer Engineering, 2006, 26 (5), pp.451-474. ⟨10.1515/POLYENG.2006.26.5.451⟩
- Accès au bibtex
-
- titre
- Processing-induced morphology: Its relationship with tensile impact behaviour in injection-moulded polypropylene
- auteur
- Eric Lafranche, Grέgory Brassart, Patricia Krawczak
- article
- Polymers and Polymer Composites, 2006, 14 (6), pp.563-576. ⟨10.1177/096739110601400602⟩
- Accès au texte intégral et bibtex
-
- titre
- Essential Work of Fracture (EWF) of multilayer films
- auteur
- Charles Poisson, Jean-Etienne Fournier, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymers and Polymer Composites, 2006, 14 (7), pp.671-689
- Accès au bibtex
-
- titre
- Polyamide-6/clay nanocomposites: A critical review
- auteur
- Bhuvanesh Gupta, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymers and Polymer Composites, 2006, 14 (1), pp.13-38
- Accès au bibtex
-
Conference papers
- titre
- A nanocomposite approach for improving of Poly(D,L-lactide) mechanical properties
- auteur
- Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak, Michel Sclavons, N. Quiévy, Jacques Devaux, Frédéric Peurton, Saïd Elkoun, Jean Marc Lefebvre
- article
- 3ème Colloque International COBIO "Produits biodégradables et environnementaux", Oct 2006, Reims, France
- Accès au bibtex
-
- titre
- Modélisation de la compression uniaxiale de renforts fibreux en grandes déformations élastoplastiques
- auteur
- Sébastien Comas-Cardona, Philippe Le Grognec, Christophe Binetruy, Patricia Krawczak
- article
- Journée Scientifique et Technique (JST) AMAC "Mise en Forme des Matériaux Composites", Association pour les Matériaux Composites (AMAC), Oct 2006, Châtillon, France
- Accès au bibtex
-
- titre
- Le collectif au service de l'innovation: Club Composites +20
- auteur
- Patricia Krawczak
- article
- Innovation Plasturgie 2015: Enjeux et priorités en matière d'innovation dans la filière plasturgie, Oct 2006, Marcq-en-Baroeul, France
- Accès au bibtex
-
- titre
- Properties of poly(D,L-lactide)-based nanocomposites
- auteur
- Frédéric Peurton, Saïd Elkoun, Jeremie Soulestin, Michel Sclavons, N. Quiévy, J.M. Lefebvre, Jacques Devaux, Marie-France Lacrampe, Patricia Krawczak
- article
- BioPlastics 2006, International Symposium on Bioplastics and Natural Fiber Composites, Sep 2006, Montréal, Canada
- Accès au bibtex
-
- titre
- Fiabilisation du moulage RTM
- auteur
- Anne Laurent-Mounier, Christophe Binetruy, Patricia Krawczak
- article
- Journées techniques AIA-CP " Evolution des matériaux composites organiques et leurs procédés dans les domaines aéronautique et naval", Sep 2006, Cuers-Pierrefeu, France
- Accès au bibtex
-
- titre
- Local heat transfer effects involved in dynamic composites manufacturing processes
- auteur
- Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- 12th European Conference on Composite Materials (ECCM-12), Aug 2006, Biarritz, France
- Accès au bibtex
-
- titre
- Mechanical properties and permeability measurements of fibre reinforcements: A continuous method
- auteur
- Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.211-217
- Accès au bibtex
-
- titre
- Heat transfer modelling during liquid composite molding manufacturing processes: Comparison between two model
- auteur
- Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- 8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.147-153
- Accès au bibtex
-
- titre
- Processing-dependent microstructure of long glass fibre reinforced polyamide 6-6 injection mouldings and related mechanical properties
- auteur
- Eric Lafranche, Arnaud Coulon, Patricia Krawczak, Jean-Pierre Ciolczyk, Jérôme Maugey
- article
- 8th International Conference on Flow Processes in Composite Materials (FPCM-8), Jul 2006, Douai, France. pp.401-408
- Accès au bibtex
-
- titre
- Particle image velocimetry applied to extrusion-moulding process visualization
- auteur
- Jean-Etienne Fournier, Marie-France Lacrampe, Patricia Krawczak
- article
- 22nd Annual Meeting of Polymer Processing Society (PPS-22), Jul 2006, Yamagata, Japan. Paper n°SP5-05
- Accès au bibtex
-
- titre
- Effect of nanoclay on dimensional stability and optical properties of injection-moulded polypropylene parts
- auteur
- Sylvie Fourdrin, Bernd Rothe, Marie-France Lacrampe, Jeremie Soulestin, Patricia Krawczak
- article
- 2nd International Symposium on “Nanostructured and Functional Polymer-based Materials and Nanocomposites” (NANOFUN-POLY), May 2006, Lyon, France
- Accès au bibtex
-
- titre
- Wall slip during polymer processing: Comparison between direct visualization and indirect rheological experiments
- auteur
- Jean-Etienne Fournier, Marie-France Lacrampe, Patricia Krawczak
- article
- 3rd Annual European Rheology Conference (AERC 2006), Apr 2006, Hersonisos, Crete, Greece
- Accès au bibtex
-
- titre
- Injection moulding of long glass fibre reinforced thermoplastics (LFT): Structure/processing conditions/mechanical properties relationship
- auteur
- Eric Lafranche, Patricia Krawczak
- article
- 9th International Esaform Conference on Material Forming (ESAFORM 2006), Apr 2006, Glasgow, United Kingdom. pp.731-734
- Accès au bibtex
-
- titre
- New method to measure and predict dynamic void content in Liquid Composite Molding
- auteur
- Boris Gourichon, C. Binetruy, Patricia Krawczak
- article
- 9th International Esaform Conference on Material Forming (ESAFORM 2006), Apr 2006, Glasgow, United Kingdom. pp.723-726
- Accès au bibtex
-
- titre
- Structure-properties relationships of polyamide-6/clay nanocomposites blown films
- auteur
- Frédéric Peurton, Saïd Elkoun, Valérie Miri, Roland Séguéla, J.M. Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- 13rd International Conference on Deformation, Yield and Fracture of Polymers (DYFP), http://www.dyfp-conferences.org/, Apr 2006, Kerkrade, Netherlands
- Accès au bibtex
-
- titre
- A global methodology to measure continuously mechanical properties in compression and permeability of fiber reinforcements
- auteur
- Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe 2006, Mar 2006, Paris, France. pp.352-357
- Accès au bibtex
-
- titre
- Etude des relations structure - propriétés de films soufflés multicouches de type PE/liant/PA6
- auteur
- N. Sallem-Idrissi, Valérie Miri, Saïd Elkoun, Christophe Depecker, Roland Séguéla, Jean Marc Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- 20ème colloque National "DÉformation des POlymères Solides" (DEPOS-20), Mar 2006, Obernai, France
- Accès au bibtex
-
- titre
- Relation mise en oeuvre - structure - propriétés de nanocomposites polyamide 6 / montmorillonite
- auteur
- Frédéric Peurton, Charles Poisson, Saïd Elkoun, Valérie Miri, Jean Marc Lefebvre, Roland Séguéla, Marie-France Lacrampe, Patricia Krawczak
- article
- 20ème colloque National "DÉformation des POlymères Solides" (DEPOS-20), Mar 2006, Obernai, France
- Accès au bibtex
-
Book sections
- titre
- Liaison renfort/matrice: Comportement des composites
- auteur
- Anne Bergeret, Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM5307, 2006, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5307⟩
- Accès au bibtex
-
- titre
- Liaison renfort/matrice: Modélisation de l'interface
- auteur
- Anne Bergeret, Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM5306, 2006, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5306⟩
- Accès au bibtex
-
- titre
- Liaison renfort/matrice: Définition et caractérisation
- auteur
- Anne Bergeret, Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM5305, 2006, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5305⟩
- Accès au bibtex
-
- titre
- Conduite adaptative du procédé d'injection des thermoplastiques
- auteur
- Jean-Etienne Fournier, Nicolas Havard, Marie-France Lacrampe, Marc Ryckebusch, Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.IN53, 2006, Traité "Innovations Technologiques"
- Accès au bibtex
-
2005
Journal articles
- titre
- Caractérisation de la dispersion thermique lors d'une injection RTM
- auteur
- Mylene Deleglise, Markus Henne, Christophe Binetruy, Patricia Krawczak, Paolo Ermanni
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2005, 15 (3), pp.309 - 322. ⟨10.3166/rcma.15.309-322⟩
- Accès au bibtex
-
- titre
- Multipurpose carbon fiber sensor design for analysis and monitoring of the resin transfer molding of polymer composites
- auteur
- Anne Laurent-Mounier, Christophe Binetruy, Patricia Krawczak
- article
- Polymer Composites, 2005, 26 (5), pp.717 - 730. ⟨10.1002/pc.20104⟩
- Accès au bibtex
-
- titre
- Solution to filling time prediction issues for constant pressure driven injection in RTM
- auteur
- Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2005, 36 (3), pp.339 - 344. ⟨10.1016/j.compositesa.2004.07.001⟩
- Accès au bibtex
-
- titre
- A novel adaptive process control for injection moulding of BMC and CIC polyester compounds
- auteur
- Eric Lafranche, Laura Cilleruelo, Marc Ryckebusch, Patricia Krawczak
- article
- Advanced composites letters, 2005, 14 (5), pp.151-161
- Accès au bibtex
-
- titre
- Engineer training and e-learning at Douai
- auteur
- Patricia Krawczak, Marie-France Lacrampe
- article
- JEC Composites Magazine, 2005, 14, pp.30-31
- Accès au bibtex
-
- titre
- Void content prediction in RTM
- auteur
- Boris Gourichon, Christophe Binetruy, Patricia Krawczak
- article
- JEC Composites Magazine, 2005, 21, pp.70
- Accès au bibtex
-
- titre
- Developments in Liquid Composite Moulding simulation
- auteur
- Mylène Deléglise, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- JEC Composites Magazine, 2005, 20, pp.68-69
- Accès au bibtex
-
- titre
- Injection moulding of long glass fiber reinforced polyamide 66: Processing conditions/microstructure/flexural properties relationship
- auteur
- Eric Lafranche, Patricia Krawczak, Jean-Pierre Ciolczyk, Jérôme Maugey
- article
- Advances in Polymer Technology, 2005, 24 (2), pp.114 - 131. ⟨10.1002/adv.20035⟩
- Accès au bibtex
-
- titre
- Capteurs polymères : un potentiel en développement
- auteur
- J.-E. Fournier, M.-F. Lacrampe, P. Krawczak
- article
- Matériaux et Techniques, 2005, 93 (1-2), pp.29 - 38. ⟨10.1051/mattech/200593029⟩
- Accès au bibtex
-
- titre
- A generic mixed FE-SPH method to address hydro-mechanical coupling in liquid composite moulding processes
- auteur
- Sébastien Comas-Cardona, Paul Groenenboom, Christophe Binetruy, Patricia Krawczak
- article
- Composites Part A: Applied Science and Manufacturing, 2005, 36 (7), pp.1004-1010. ⟨10.1016/j.compositesa.2004.11.009⟩
- Accès au texte intégral et bibtex
-
- titre
- Simulation of liquid composite molding processes using a generic mixed FE-SPH method
- auteur
- Sébastien Comas-Cardona, Paul Groenenboom, Christophe Binétruy, Patricia Krawczak
- article
- Revue Européenne des Éléments Finis, 2005, 14 (6-7), pp.867-883. ⟨10.3166/reef.14.867-883⟩
- Accès au texte intégral et bibtex
-
- titre
- Hydrothermal aging of GF/PP composites: When glass/polymer adhesion favours water entrapment
- auteur
- Damien Lariviere, Patricia Krawczak, Claude Tiberi, Paul Lucas
- article
- Polymers and Polymer Composites, 2005, 13 (1), pp.27-35. ⟨10.1177/096739110501300102⟩
- Accès au texte intégral et bibtex
-
- titre
- Ecole des Mines de Douai: Un centre de recherche en prise avec les entreprises
- auteur
- Patricia Krawczak
- article
- JEC Composites Magazine, 2005, 21, Supplément, pp.28-29
- Accès au bibtex
-
- titre
- SMEs joining forces to promote the expansion of composites
- auteur
- Patricia Krawczak
- article
- JEC Composites Magazine, 2005, 17, pp.17-18
- Accès au bibtex
-
Conference papers
- titre
- Corrélation entre le coefficient de frottement macroscopique et la morphologie de l’extrême surface, caractérisée par AFM, d’un film multicouche PE/PgMAH/PA contenant un agent glissant de type acide d’amide gras
- auteur
- Charles Poisson, Vincent Ferreiro, Marie-France Lacrampe, Patricia Krawczak
- article
- 6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, LIlle, France
- Accès au bibtex
-
- titre
- Mise au point et évaluation d’un dispositif expérimental de mesure du coefficient de frottement polymère fondu / outillage de transformation
- auteur
- Jean-Etienne Fournier, Natalia Simon Rovira, Marie-France Lacrampe, Patricia Krawczak
- article
- 6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, Lille, France
- Accès au bibtex
-
- titre
- Relation mise en oeuvre - structure - propriétés de nanocomposites polyamide 6 / montmorillonite
- auteur
- F. Peurton, Charles Poisson, Saïd Elkoun, Valérie Miri, J.M. Lefebvre, Roland Séguéla, Marie-France Lacrampe, Patricia Krawczak
- article
- 6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, Lille, France
- Accès au bibtex
-
- titre
- Etude des relations structure-propriétés de films soufflés multicouches de type PE/liant/PA6
- auteur
- N. Sallem-Idrissi, Valérie Miri, Saïd Elkoun, Christophe Depecker, Roland Seguela, J.M. Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- 6ème Colloque Franco-Québécois sur les Polymères, Nov 2005, Lille, France
- Accès au bibtex
-
- titre
- Ecole des Mines de Douai: Un centre de recherche en prise directe avec le monde de l’entreprise
- auteur
- Patricia Krawczak
- article
- Forum JEC Composites "Initiatives composites en régions", JEC Group, Oct 2005, Paris, France
- Accès au bibtex
-
- titre
- Structure and properties of PA6-based nanocomposites blown films
- auteur
- Frédéric Peurton, Saïd Elkoun, Valérie Miri, J.M. Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- Polymer Nanocomposites 2005, Sep 2005, Montréal, Canada
- Accès au bibtex
-
- titre
- Continuous manufacturing and performance of 3D reinforced sandwich structures
- auteur
- Guy Leroy, Christophe Binetruy, Patricia Krawczak
- article
- 7th International Conference on Sandwich Structures (ICSS-7), Aug 2005, Aalborg, Denmark. pp.693-702
- Accès au bibtex
-
- titre
- A novel extrusion-welded sandwich structure for thermoplastic composite storage tanks
- auteur
- Marie-France Lacrampe, Emeric Lagardère, Olivier Skawinski, Patricia Krawczak, Christophe Ducret, Matthieu Giletti
- article
- 7th International Conference on Sandwich Structures (ICSS-7), Aug 2005, Aalborg, Denmark. pp.703-711
- Accès au bibtex
-
- titre
- Reduction of starch hydrophilicity by grafting lignin derivatives under EB irradiation: A study of model compounds
- auteur
- M. Froment, C. Gors, Fréderic Cazaux, X. Coqueret, S. Lepifre, S. Baumberger, C. Lapierre, C. Linz, Marie-France Lacrampe, Patricia Krawczak
- article
- 13th International Starch Convention, Jun 2005, Moscow, Russia. pp.167-178
- Accès au bibtex
-
- titre
- Influence of process control type on thermoplastic injection moulded part quality
- auteur
- Nicolas Havard, Jean-Etienne Fournier, Marie-France Lacrampe, Marc Ryckebusch, Patricia Krawczak
- article
- 21st Annual Meeting of the Polymer Processing Society (PPS-21), Jun 2005, Leipzig, Germany. Paper n° SL 13.1
- Accès au texte intégral et bibtex
-
- titre
- Isothermal and non isothermal crystallization of Nylon 6 – clay nanocomposites
- auteur
- Frédéric Peurton, Saïd Elkoun, Valérie Miri, Jean Marc Lefebvre, Marie-France Lacrampe, Patricia Krawczak
- article
- 8th European Symposium on Polymer Blends and Eurofillers 2005, May 2005, Bruges, Belgium
- Accès au bibtex
-
- titre
- Solution to filling time prediction issues for constant pressure driven injection in RTM
- auteur
- Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe 2005, Apr 2005, Paris, France. pp.98-103
- Accès au bibtex
-
- titre
- Injection de thermoplastiques PET renforcés de fibres de verre longues
- auteur
- Laura Cilleruelo, Eric Lafranche, Patricia Krawczak, Paul Lucas, P. Pardo
- article
- 14èmes Journées Nationales sur les Composites (JNC14), Mar 2005, Compiègne, France. pp.89-98
- Accès au bibtex
-
- titre
- Comportement poro-élasto-plastique en compression des renforts fibreux
- auteur
- Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 14èmes Journées Nationales sur les Composites (JNC14), Mar 2005, Compiègne, France. pp.99-107
- Accès au bibtex
-
2004
Journal articles
- titre
- Interfacial properties in commingled yarn thermoplastic composites. Part I: Characterization of the fiber/matrix adhesion
- auteur
- D. Lariviere, P. Krawczak, C. Tiberi, Philippe Lucas
- article
- Polymer Composites, 2004, 25 (6), pp.577 - 588. ⟨10.1002/pc.20052⟩
- Accès au bibtex
-
- titre
- Interfacial properties in commingled yarn thermoplastic composites. Part II: Influence on crack initiation and propagation
- auteur
- D. Lariviere, P. Krawczak, C. Tiberi, Philippe Lucas
- article
- Polymer Composites, 2004, 25 (6), pp.589 - 600. ⟨10.1002/pc.20053⟩
- Accès au bibtex
-
- titre
- All-Thermoplastic Composite Sandwich Panels – Part II: Modelling of Bending Behaviour
- auteur
- Olivier Skawinski, Christophe Binetruy, Patricia Krawczak, Jerome Grando, Eric Bonneau, Jean-Marc Scanzi, Bruno Hilaire
- article
- Journal of Sandwich Structures and Materials, 2004, 6 (5), pp.423 - 446. ⟨10.1177/1099636204040093⟩
- Accès au bibtex
-
- titre
- All-Thermoplastic Composite Sandwich Panels – Part I: Manufacturing and Improvement of Surface Quality
- auteur
- Olivier Skawinski, Christophe Binetruy, Patricia Krawczak, Jerome Grando, Eric Bonneau
- article
- Journal of Sandwich Structures and Materials, 2004, 6 (5), pp.399 - 421. ⟨10.1177/1099636204040094⟩
- Accès au bibtex
-
- titre
- Weld-line sensitivity of injected amorphous polymers
- auteur
- E. Debondue, J.-E. Fournier, M.-F. Lacrampe, P. Krawczak
- article
- Journal of Applied Polymer Science, 2004, 93 (2), pp.644 - 650. ⟨10.1002/app.20488⟩
- Accès au bibtex
-
- titre
- Heat transfer of fibre beds in resin transfer moulding: an experimental approach
- auteur
- Markus Henne, Paolo Ermanni, Mylene Deleglise, Patricia Krawczak
- article
- Composites Science and Technology, 2004, 64 (9), pp.1191 - 1202. ⟨10.1016/j.compscitech.2003.09.021⟩
- Accès au bibtex
-
- titre
- Biaxial deformation of polyamide-6: Assessment of orientation by means of infrared trichroism
- auteur
- K.C. Cole, C. Depecker, M. Jutigny, J.-M. Lefebvre, P. Krawczak
- article
- Polymer Engineering and Science, 2004, 44 (2), pp.231 - 240. ⟨10.1002/pen.20022⟩
- Accès au bibtex
-
- titre
- Weldlines in injection-molded reinforced thermoplastics : mechanical performances improvement through intrusion induced fiber reorientation
- auteur
- E. Debondue, J.E. Fournier, M.F. Lacrampe, Patricia Krawczak
- article
- Polymers and Polymer Composites, 2004, 12 (5), pp.373-381
- Accès au bibtex
-
- titre
- Soudabilité de films issus de multicouches recyclés
- auteur
- Vincent Hervais, Marie-France Lacrampe, Patricia Krawczak
- article
- Caoutchoucs et Plastiques, 2004, 832, pp.28-32
- Accès au bibtex
-
Conference papers
- titre
- Caractérisation de la dispersion thermique lors d’une injection RTM
- auteur
- Mylene Deleglise, Markus Henne, Christophe Binetruy, Patricia Krawczak, Paolo Ermanni
- article
- Journée Scientifique et Technique (JST) AMAC "Mise en Forme des Matériaux Composites", Association pour les Matéraiux Composites (AMAC), Dec 2004, Le Havre, France. pp.309-322, ⟨10.3166/rcma.15.309-322⟩
- Accès au bibtex
-
- titre
- The potential of the mixed FE-SPH method to simulate the manufacturing of polymer composites
- auteur
- Sébastien Comas-Cardona, Paul Groenenboom, Christophe Binetruy, Patricia Krawczak
- article
- EuroPAM 2004, Oct 2004, Paris, France
- Accès au bibtex
-
- titre
- Simulation of isothermal RTM using Smoothed Particle Hydrodynamics
- auteur
- Paul Groenenboom, Sébastien Comas-Cardona, Christophe Binetruy, Patricia Krawczak
- article
- 7th International Conference on Flow Processes in Composite Materials (FPCM-7), Jul 2004, Newark, Delaware, United States. pp.275-280
- Accès au bibtex
-
- titre
- Modeling and simulation of Liquid Compression Molding using LIMS
- auteur
- Mylene Deleglise, Christophe Binetruy, Patricia Krawczak
- article
- 7th International Conference on Flow Processes in Composite Materials (FPCM-7), Jul 2004, Newark, Delaware, United States. pp.347-352
- Accès au bibtex
-
- titre
- Investigation of fabric saturation in RTM
- auteur
- Boris Gourichon, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe 2004, Mar 2004, Paris, France. pp.23-29
- Accès au bibtex
-
2003
Journal articles
- titre
- Business/Human Capital : Heads of laboratory must meet economic expectations
- auteur
- Christophe Binetruy, Patricia Krawczak
- article
- JEC Composites Magazine, 2003, 3, pp.32
- Accès au bibtex
-
- titre
- Acoustic emission applied to failure analysis of commingled yarn GF/PP composites in transverse tension and mode I delamination
- auteur
- Damien Lariviere, Patricia Krawczak, Claude Tiberi, Paul Lucas
- article
- Advanced composites letters, 2003, 13 (5), pp.191-202
- Accès au bibtex
-
Conference papers
- titre
- Modeling of the bending behavior of all-thermoplastic sandwich panels manufactured by isothermal compression
- auteur
- Olivier Skawinski, Christophe Binetruy, Patricia Krawczak, Jerome Grando, Eric Bonneau, J. Scanzi, Bruno Hilaire
- article
- 6th International Conference on Sandwich Structures (ICSS-6), Mar 2003, Fort Lauderdale, United States. pp.806-816
- Accès au bibtex
-
Book sections
- titre
- Plastiques et composites - Avant-propos
- auteur
- Patricia Krawczak, Gilbert Villoutreix, Jean-François Agassant, Christophe Binetruy, Marie-France Lacrampe
- article
- Techniques de l'Ingénieur, 1 (AM15), Editions T.I., AM15 - p. 1-3, 2003
- Accès au bibtex
-
2002
Journal articles
- titre
- Etude expérimentale des mécanismes d'écoulement dans le moulage par injection des BMC
- auteur
- Eric Lafranche, Stéphane Menio, Marie-Laure Guegan, Patricia Krawczak
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (3), pp.461 - 475. ⟨10.3166/rcma.12.461-475⟩
- Accès au bibtex
-
- titre
- Compression des renforts dans les procédés LCM : 1. Analyse mécanique et microstructurale
- auteur
- Sophie Morel, Christophe Binetruy, Patricia Krawczak
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (2), pp.243 - 263. ⟨10.3166/rcma.12.243-263⟩
- Accès au bibtex
-
- titre
- Compression des renforts dans les procédés LCM : 2. Modélisation de la perméabilité
- auteur
- Christophe Binetruy, Patricia Krawczak
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (2), pp.265 - 283. ⟨10.3166/rcma.12.265-283⟩
- Accès au bibtex
-
- titre
- Le recyclage des films multicouches PA/PE
- auteur
- Vincent Hervais, Patricia Krawczak
- article
- Caoutchoucs et Plastiques, 2002, 804, pp.32-39
- Accès au bibtex
-
- titre
- Gonflement en sortie de filière d’extrusion : Techniques de mesure expérimentale
- auteur
- Marie-France Lacrampe, Laurence Dufrancatel-Veiller, Patricia Krawczak
- article
- Caoutchoucs et Plastiques, 2002, 807, pp.32-37
- Accès au bibtex
-
Conference papers
- titre
- Flow simulation of an automotive resin transfer molded complex shape parts made with preformed heavy tow carbon fabrics: Comparison with experimental results
- auteur
- Christophe Binetruy, Marie-France Lacrampe, Patricia Krawczak, Nicola Piccirelli
- article
- EuroPAM 2002, Oct 2002, Antibes, France
- Accès au bibtex
-
- titre
- Adequateness of the French plastic engineering curricula with the industrial need
- auteur
- Patricia Krawczak
- article
- Assises de la Plasturgie 2002, European "Plastics Network" Conference on Education and Training, Fédération de la Plasturgie, Oct 2002, Paris, France
- Accès au bibtex
-
- titre
- International opening of the engineering curriculum in plastics processing at Ecole des Mines de Douai
- auteur
- Patricia Krawczak
- article
- Assises de la Plasturgie 2002, European "Plastics Network" Conference on Education and Training, Fédération de la Plasturgie, Oct 2002, Paris, France
- Accès au bibtex
-
- titre
- Etude expérimentale des mécanismes d’écoulement dans le moulage par injection des BMC
- auteur
- Eric Lafranche, Stéphane Menio, Marie-Laure Guegan, Patricia Krawczak
- article
- Journée Scientifique et Technique (JST) AMAC "Mise en forme des matériaux composites", Association pour les Matéraiux Composites (AMAC), Oct 2002, Paris, France. pp.461-475, ⟨10.3166/rcma.12.461-475⟩
- Accès au bibtex
-
- titre
- Biaxial deformation of polyamide-6: Assesment of orientation by means of infrared trichroism
- auteur
- C. Depecker, M. Jutigny, Patricia Krawczak, J.M. Lefebvre, K.C. Cole
- article
- Polymers Films and Fibers 2002, Sep 2002, Montréal, Canada
- Accès au bibtex
-
- titre
- Fabrication et utilisation fiabilisées de pièces en composites moulées par injection
- auteur
- Patricia Krawczak
- article
- 30èmes Journées d’Etude des Polymères (JEPO 30), Groupe Français d'Etudes et d'Applications des Polymères (GFP), Sep 2002, Guéthary, France
- Accès au bibtex
-
- titre
- Continuous carbone fiber sensors as flow front monitoring device in resin transfer molding process
- auteur
- Anne Laurent-Mounier, Christophe Binetruy, Patricia Krawczak
- article
- 10th European Conference on Composite Materials (ECCM-10), Jun 2002, Brugge, Belgium. Paper N°175
- Accès au bibtex
-
- titre
- Modelling of bending behavior of glass/PP-PP foam core sandwich panels manufactured by isothermal compression
- auteur
- Olivier Skawinski, Christophe Binetruy, Patricia Krawczak, Jerome Grando, Eric Bonneau, J. Scanzi, Bruno Hilaire
- article
- 10th European Conference on Composite Materials (ECCM-10), Jun 2002, Brugge, Belgium. Paper n°177
- Accès au bibtex
-
- titre
- RTM flow front monitoring by means of carbon fiber sensors
- auteur
- Anne Laurent-Mounier, Christophe Binetruy, Patricia Krawczak
- article
- SAMPE Europe, Apr 2002, Paris, France. pp.125-136
- Accès au bibtex
-
- titre
- Simulation du moulage RTM de pièces techniques
- auteur
- Christophe Binetruy, Patricia Krawczak, Patrick De Luca
- article
- Colloque SFIP+GPIC "Le RTM: état des lieux, potentiel", Société Française des Ingénieurs des Plastiques (SFIP); Groupement de la Plasturgie Industrielle et des Composites (GPIC), Feb 2002, Paris, France
- Accès au bibtex
-
Book sections
- titre
- Réservoirs haute pression en composites
- auteur
- Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM 5530, 2002, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5530⟩
- Accès au bibtex
-
2001
Conference papers
- titre
- Appareils à pression en composites
- auteur
- Patricia Krawczak
- article
- Journée Technique "Un Siècle de Fenzy : 1901-2001", Nov 2001, Douai, France
- Accès au bibtex
-
- titre
- Technical and scientific aspects of composite materials: Review and prospects
- auteur
- Olivier Skawinski, Christophe Binetruy, Patricia Krawczak
- article
- Symposium on Composite Materials, Nov 2001, Istanbul, Turkey
- Accès au bibtex
-
- titre
- Application of numerical simulation to the cost effective improvement of Resin Transfer Moulding for engineered composite parts
- auteur
- Christophe Binetruy, Patricia Krawczak, Jean Pierre Cauchois
- article
- Symposium on Composite Materials, Nov 2001, Istanbul, Turkey
- Accès au bibtex
-
- titre
- Application of numerical simulation to the cost effective improvement of Resin Transfer Molding for engineered composite parts
- auteur
- Christophe Binetruy, Patricia Krawczak, Jean Pierre Cauchois
- article
- CANCOM 2001, Aug 2001, Montréal, Canada
- Accès au bibtex
-
- titre
- Effect of surface treatment on mode II interlaminar fracture behaviour of plain glass woven fabric composites : Report of the third SIMS round-robin test
- auteur
- L. Berger, W.J. Cantwell, M. Kupke, K. Schulte, J.K. Kim, T.K. Ting, Q. Yuan, Y.J. Dong, H.S. Yang, Y.L. Bai, M. Kotaki, T. Kuriyima, M. Mizoguchi, H. Hamada, Patricia Krawczak, R. Bequignat, José Pabiot
- article
- 13th International Conferences on Composite Materials (ICCM 13), Jun 2001, Beijing, China
- Accès au bibtex
-
- titre
- Contribution to the development of RTM process adapted textile reinforcements: Influence of geometrical characteristics on permeability
- auteur
- Sophie Morel, Christophe Binetruy, Patricia Krawczak, José Pabiot
- article
- SAMPE Europe 2001, Mar 2001, Paris, France. pp.367-378
- Accès au bibtex
-
- titre
- Exemple d’optimisation technico-économique de la fabrication de pièces techniques par RTM: Apport de la simulation numérique
- auteur
- Christophe Binetruy, Jean Pierre Cauchois, Patricia Krawczak
- article
- SYNERGIE 2001, Jan 2001, Troyes, France
- Accès au bibtex
-
2000
Journal articles
- titre
- Influence de la post-cuisson sur le comportement à long terme en fissuration sous tension dans l’eau de composites verre/vinylester
- auteur
- Virginie Lietard, Patricia Krawczak, José Pabiot
- article
- European Polymer Journal, 2000, 36 (3), pp.555 - 570. ⟨10.1016/S0014-3057(99)00090-7⟩
- Accès au bibtex
-
- titre
- Les composites dans le ferroviaire : Sécurité et intelligence, les derniers développements
- auteur
- Patricia Krawczak, Christophe Binetruy
- article
- Le Rail, 2000, 80, pp.40-41
- Accès au bibtex
-
- titre
- Zagadnienie wytrzymalosci dlugotrwalej rur z kompozytow polimerowych w ujeciu norm
- auteur
- A. Belzowski, Patricia Krawczak, José Pabiot
- article
- Dozor Techniczny, 2000, 2, pp.31-36
- Accès au bibtex
-
- titre
- Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites: Part I. Report of the 2nd round-robin test results
- auteur
- J.K. Kim, M.L. Sham, H. Hamada, Y. Hirai, K. Fujihara, H. Saidpour, M. Sezen, Y.J. Dong, H.S. Yang, Y.L. Bai, T.X. Mao, C. Bathias, S.V. Hoa, A. Boutella, A.D. Ngo, P. Krawczak, R. Bequignat, José Pabiot, S. Pinter, G. Banheygyi, L.T. Drzal, H. Ho, C.Y. Yue, K. Padmanabhan, Y. Suzuki, T. Tanimoto, K. Schulte, J.K. Karger-Kocsis, W.J. Cantwell, R. Zulkitli, L. Ye, J.J. Lesko, K. Garcia
- article
- Composite Interfaces , 2000, 9 (2), pp.227-242. ⟨10.1163/156855400300185333⟩
- Accès au bibtex
-
Conference papers
- titre
- The interest of the Ecole des Mines de Douai in being part of the european master in polymer processing and product manufacture
- auteur
- Patricia Krawczak
- article
- EuPC Plastics Forum 2000, European Plastics Converters (EuPC), May 2000, Brussels, Belgium
- Accès au bibtex
-
- titre
- Application de la mécanotransduction au suivi et à l'optimisation de la fabrication et de l'utilisation de pièces en composites moulées par RTM
- auteur
- Patricia Krawczak, Christophe Binetruy, José Pabiot
- article
- MECANO 2000, May 2000, Champs-sur-Marne, France. pp.99-106
- Accès au texte intégral et bibtex
-
- titre
- Réservoirs haute pression en composites: Solutions technologiques et marchés associés
- auteur
- Patricia Krawczak
- article
- Colloque SFIP+GPIC "Avancements dans le domaine des matières organiques et enroulement filamentaire pour nouvelles pièces techniques", Société Française des Ingénieurs des Plastiques (SFIP); Groupement de la Plasturgie Industrielle et des Composites (GPIC), Apr 2000, Paris, France
- Accès au bibtex
-
- titre
- Smart composites applied to monitoring and optimisation of manufacturing and utilisation of RTM moulded parts
- auteur
- Christophe Binetruy, Patricia Krawczak, José Pabiot
- article
- SAMPE Europe 2000, Apr 2000, Paris, France. pp.521-532
- Accès au bibtex
-
- titre
- Mechanical behavior and damage of continous glass fiber reinforced thermoplastic composites: Influence of fiber/matrix interface
- auteur
- Damien Lariviere, Patricia Krawczak, José Pabiot, Machiko Maeda, H. Hamada, Claude Tiberi, Paul Lucas
- article
- SAMPE Europe 2000, Apr 2000, Paris, France. pp.629-640
- Accès au bibtex
-
- titre
- Application of acoustic emission to the analysis of interfacial phenomena in continous glass fibre reinforced thermoplastics composites
- auteur
- Damien Lariviere, Patricia Krawczak, José Pabiot, Machiko Maeda, H. Hamada, C. Tiberi, Paul Lucas
- article
- FRP Symposium, JSMS Composites-29, Mar 2000, Shiga, Japan
- Accès au bibtex
-
- titre
- Die Ausbildung des Kunststofftechnik-Ingenieure in Frankreich ausgerichtet an den Bedürfnissen der Industrie
- auteur
- Patricia Krawczak
- article
- VDI-Tagung "Spritzgiessen 2000+, Visionen, Strategien und Technologien", Feb 2000, Baden-Baden Germany. pp.201-210
- Accès au bibtex
-
Book sections
- titre
- Essais mécaniques des plastiques : Caractéristiques rhéologiques et thermiques
- auteur
- Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM3512, 2000, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am3512⟩
- Accès au bibtex
-
1999
Journal articles
- titre
- Influence d'une modification de la formulation de la résine sur l'endommagement et le perlage de tubes en composites sous contraintes biaxiales
- auteur
- P. Krawczak, P. Vandevoir, J. Pabiot, G. Béhar
- article
- Composites, 1999, 32, pp.92-99
- Accès au bibtex
-
- titre
- Ténacité résiduelle de composites verre/vinylester à renfort unidirectionnel : Effets séparés et couplés d’un environnement hydrothermique et d’un chargement mécanique à ouverture de fissure imposée
- auteur
- Virginie Lietard, Patricia Krawczak, José Pabiot
- article
- Matériaux et Techniques, 1999, 87 (7-8), pp.9 - 16. ⟨10.1051/mattech/199987070009⟩
- Accès au bibtex
-
- titre
- Influence de l'interface fibre/matrice sur le comportement en fissuration sous tension de composites verre/époxy unidirectionnels
- auteur
- Virginie Lietard, Patricia Krawczak, José Pabiot
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 1999, 9 (1), pp.71-91
- Accès au bibtex
-
Conference papers
- titre
- Prévision du comportement à long terme de tubes sous pression interne en fonction de la qualité de l'interface
- auteur
- Patricia Krawczak, P. Vandevoir, José Pabiot
- article
- Journée Scientifique et Technique (JST) AMAC "Influence de l'interaction des paramètres structuraux et de mise en oeuvre sur le comportement mécanique des composites fibreux à matrice organique", Association pour les Matériaux Composites (AMAC), Nov 1999, Compiègne, France
- Accès au bibtex
-
- titre
- Développement de structures composites intelligentes. Application au suivi d'endommagement de tubes verre/résine par capteurs résistifs intégrés
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- 14ème Congrés Français de Mécanique (CFM 1999), Association Française de Mécanique (AFM), Aug 1999, Toulouse, France
- Accès au bibtex
-
- titre
- Smart composites applied to continuous in-service damage monitoring of glass/polymer industrial parts
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- 12th International Conference on Composite Materials (ICCM-12), Jul 1999, Paris, France. Paper n°285
- Accès au bibtex
-
- titre
- Influence of the fibre/matrix interface on the long term dynamic and environmental stress cracking behaviour of glass/epoxy composites
- auteur
- Virginie Lietard, Patricia Krawczak, José Pabiot
- article
- 12th International Conference on Composite Materials (ICCM-12), Jul 1999, Paris, France. Paper n°248
- Accès au bibtex
-
- titre
- Prédiction of the long term mechanical behaviour of composite pipes under internal pressure from short term tests
- auteur
- Patricia Krawczak, P. Vandevoir, José Pabiot
- article
- 12th International Conference on Composite Materials (ICCM-12), Jul 1999, Paris, France. Paper N°105
- Accès au bibtex
-
- titre
- Processing and behaviour analysis of polymer matrix composite materials and industrial parts
- auteur
- Patricia Krawczak, José Pabiot
- article
- French Korean Workshop, Jun 1999, Paris, France
- Accès au bibtex
-
Book sections
- titre
- Essais mécaniques des plastiques : Caractéristiques à long terme et ténacité
- auteur
- Patricia Krawczak
- article
- Techniques de l'Ingénieur, Traité "Plastiques et Composites", Editions T.I., pp.AM3511, 1999, ⟨10.51257/a-v1-am3511⟩
- Accès au bibtex
-
- titre
- Essais mécaniques des plastiques: Caractéristiques instantanées
- auteur
- Patricia Krawczak
- article
- Techniques de l'Ingénieur, , pp.AM3510, 1999, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am3510⟩
- Accès au bibtex
-
1998
Journal articles
- titre
- Capteurs résistifs intégrés en fibres de carbone pour le suivi in-situ de l’endommagement de pièces industrielles verre/résine: Application aux tubes sous pression interne
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 1998, 8 (2), pp.243-261
- Accès au bibtex
-
- titre
- Integrated sensors for in-service health monitoring of glass/resin composites
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- Journal of Advanced Materials -Covina-, 1998, 30 (3), pp.32-37
- Accès au bibtex
-
Conference papers
- titre
- Composites intelligents pour la maintenance préventive de pièces industrielles en verre/polymère
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- Journée ADER’98, Oct 1998, Marcq en Baroeul, France
- Accès au bibtex
-
- titre
- Integrated sensors for in service health monitoring of composite industrial parts
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- SAMPE Europe 1998, Apr 1998, Paris, France. pp.589-600
- Accès au bibtex
-
- titre
- Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites - Part 1 : Report of the 2nd round-robin test results
- auteur
- J.K. Kim, M.L. Sham, H. Hamada, Y. Hirai, K. Fujihara, H. Saidpour, M. Sezen, Y.J. Dong, H.S. Yang, Y.L. Bai, T.X. Mao, C. Bathias, S.V. Hoa, A. Boutella, A.D. Ngo, Patricia Krawczak, R. Bequignat, José Pabiot, S. Pinter, G. Banheygyi, L.T. Drzal, H. Ho, C.Y. Yue, K. Padmanabhan, Y. Suzuki, T. Tanimoto, K. Schulte, J.K. Karger-Kocsis, W.J. Cantwell, R. Zulkitli, L. Ye, J.J. Lesko, K. Garcia
- article
- 7th International Conference on Composite Interfaces (ICCI-VII), 1998, Shonan, Japan
- Accès au bibtex
-
1997
Journal articles
- titre
- Conception et réalisation d'un composite intelligent pour le suivi de l'endommagement en service d'une pièce industrielle
- auteur
- Cyril Tamiatto, Patricia Krawczak, José Pabiot, Fabrice Laurent
- article
- Composites, 1997, 19, pp.71-76
- Accès au bibtex
-
Conference papers
- titre
- Prediction of the long term behaviour of composite structures under biaxial loading
- auteur
- Patricia Krawczak, P. Vandevoir, José Pabiot
- article
- PLASTECH ASIA'97 (Asian Plastics Technical Conference), Oct 1997, Taipei, Taiwan. pp.69-74
- Accès au bibtex
-
- titre
- Effect of water absorption on the behaviour of glass/epoxy laminates
- auteur
- Yatchko Ivanov, Patricia Krawczak, José Pabiot
- article
- 8th Conference on Mechanics and Technology of Composite Materials, Sep 1997, Sofia, Bulgaria
- Accès au bibtex
-
- titre
- Effect of surface treatment on mode I interlaminar fracture behavior of plain glass woven fabric composites: Report of a Round Robin Test I
- auteur
- H. Saidpour, M. Sezen, Y.J. Dong, H.S. Yang, Y.L. Bai, T.X. Mao, C. Bathias, Patricia Krawczak, R. Bequignat, J. Pabiot, S. Pinter, G. Banheygyi, J.K. Kim, M.L. Sham, I. Verpoest, H. Hamada, Y. Hirai, K. Fujihara, C.Y. Yue, K. Padmanabhan, Y. Suzuki, K. Schulte, J.K. Karger-Kocsis, W.J. Cantwell, R. Zulkitli, L. Ye, A. Lowe, S.V. Hoa, V.V. Smirnov, L.T. Drzal, W.R. Broughton, J.J. Lesko, T. Tanimoto
- article
- 11th International Conference on Composite Materials (ICCM-11), Jul 1997, Gold Coast, Australia. pp.IV 798-807
- Accès au bibtex
-
- titre
- Effect of weave structure on mode I interlaminar fracture behavior of plain glass woven fabric composites as a function of the interface: Report of a Round Robin Test II
- auteur
- H. Saidpour, M. Sezen, Y.J. Dong, H.S. Yang, Y.L. Bai, T.X. Mao, C. Bathias, Patricia Krawczak, R. Bequignat, J. Pabiot, S. Pinter, G. Banheygyi, J.K. Kim, M.L. Sham, I. Verpoest, H. Hamada, Y. Hirai, K. Fujihara, C.Y. Yue, K. Padmanabhan, Y. Suzuki, T. Tanimoto, K. Schulte, J.K. Karger-Kocsis, W.J. Cantwell, R. Zulkitli, L. Ye, A. Lowe, S.V. Hoa, V.V. Smirnov, L.T. Drzal, W.R. Broughton, J.J. Lesko
- article
- 11th International Conference on Composite Materials (ICCM-11), Jul 1997, Gold Coast, Australia. pp.V 27-35
- Accès au bibtex
-
- titre
- The report of the Round Robin Test by SIMS: Interlaminar fracture behaviour on glass woven fabric reinforced vinylester composites
- auteur
- H. Saidpour, M. Sezen, Y.J. Dong, H.S. Yang, Y.L. Bai, C. Bathias, Patricia Krawczak, R. Bequignat, José Pabiot, S. Pinter, G. Banheygyi, J.K. Kim, M.L. Sham, I. Verpoest, C.Y. Yue, K. Padmanabhan, Y. Suzuki, K. Schulte
- article
- Symposium of Interfacial Materials Science on Composites (SIMS-C VI), May 1997, Osaka, Japan
- Accès au bibtex
-
- titre
- Les réservoirs en composites pour le stockage de gaz sous haute pression
- auteur
- Patricia Krawczak, José Pabiot
- article
- Entretiens de la Technologie, Mar 1997, Villeneuve d'Ascq, France
- Accès au bibtex
-
Book sections
- titre
- Essais des plastiques renforcés
- auteur
- Patricia Krawczak
- article
- Techniques de l'Ingénieur, Editions T.I., pp.AM5405, 1997, Traité "Plastiques et Composites", ⟨10.51257/a-v1-am5405⟩
- Accès au bibtex
-
1996
Journal articles
- titre
- Quantification de l'endommagement instantané de composites à fibres continues et matrice thermodurcissable et application à la prévision du comportement à long terme de tubes sous pression interne
- auteur
- Patricia Krawczak, José Pabiot
- article
- Composites, 1996, 17, pp.7-16
- Accès au bibtex
-
- titre
- Méthodes de caractérisation de l'interface fibre/matrice
- auteur
- Patricia Krawczak, E. Debondue, José Pabiot
- article
- Composites, 1996, 13, pp.7-14
- Accès au bibtex
-
- titre
- Caractérisation thermomécanique des composites dans le contexte de la normalisation internationale: situation et développement
- auteur
- Patricia Krawczak
- article
- Composites, 1996, 16, pp.7-14
- Accès au bibtex
-
Conference papers
- titre
- Effect of specific surface treatment of fillers on the mechanical behaviour and the hydrothermal ageing of polymers: Application to glass fiber reinforced plastics
- auteur
- Patricia Krawczak, José Pabiot
- article
- Advances in Plastics Technology (APT’96), Nov 1996, Katowice, Poland. Paper n°13
- Accès au bibtex
-
- titre
- Caractérisation thermomécanique des composites dans le contexte de la normalisation internationale: Situation et développement
- auteur
- Patricia Krawczak
- article
- Colloque SFIP+GPIC "Matrices et composites thermodurcissables", Société Française des Ingénieurs des Plastiques (SFIP); Groupement de la Plasturgie Industrielle et des Composites (GPIC), Apr 1996, Paris, France
- Accès au bibtex
-
- titre
- La mesure des porosités dans les composites industriels et leur incidence sur les propriétés mécaniques
- auteur
- Patricia Krawczak, José Pabiot
- article
- 26èmes Journées Européennes des Composites (JEC), Apr 1996, Paris, France
- Accès au bibtex
-
1995
Journal articles
- titre
- Fracture Mechanics Applied to Glass Fibre/Epoxy Matrix Interface Characterization
- auteur
- Patricia Krawczak, José Pabiot
- article
- Journal of Composite Materials, 1995, 29 (17), pp.2230-2253. ⟨10.1177/002199839502901701⟩
- Accès au bibtex
-
- titre
- Application de l'émission acoustique à la caractérisation de l'interface fibre de verre / matrice organique thermodurcissable
- auteur
- Patricia Krawczak, José Pabiot
- article
- Composites, 1995, 7, pp.6-13
- Accès au bibtex
-
- titre
- Fracture mechanics applied to the analysis of the degradation of anti-corrosion glass/resin pipes as a function of the fibre/matrix interface quality
- auteur
- Patricia Krawczak, Michel Benteyn, José Pabiot
- article
- Revue de l'Institut Français du Pétrole, 1995, 50 (1), pp.105-112
- Accès au bibtex
-
- titre
- Mecanica de fractura applicada a la caracterizacion de la interfase fibra/matriz y al analysis del deterioro mecanico de tuberias de materiales compuestos polimericos
- auteur
- Patricia Krawczak, José Pabiot
- article
- Revista de Plasticos Modernos, 1995, 70 (470), pp.163-170
- Accès au bibtex
-
- titre
- Influence of loading mode and hydrothermal environment on the contribution of the interface to the cohesion of glass/epoxy composites
- auteur
- Patricia Krawczak, José Pabiot
- article
- Polymers and Polymer Composites, 1995, 3 (4), pp.299-306
- Accès au bibtex
-
- titre
- Endommagement : La mécanique de la rupture contribue à la caractérisation de l’interface fibre/matrice et à l’analyse de la dégradation de structures tubulaires en matériaux composites
- auteur
- P. Krawczak, J. Pabiot
- article
- Matériaux et Techniques, 1995, 83 (12), pp.13 - 18. ⟨10.1051/mattech/199583120013⟩
- Accès au bibtex
-
Conference papers
- titre
- Influence of different glass fiber sizings on the mechanical properties of glass fabric composites: Report of a Round Robin Test
- auteur
- R. Bequignat, Patricia Krawczak, W.J. Cantwell, P. Scaramuzzino, M. Desaeger, I. Verpoest, H. Hamada, Y. Hirai, M. Kotaki, M. Hojo, J.J. Kim, J.K. Karger-Kocsis, T.J. Mackin, J. Mayer, T. Morii, T. Tanimoto
- article
- 10th International Conference on Composite Materials (ICCM-10), Aug 1995, Whistler, Canada. pp.VI-597-603
- Accès au bibtex
-
- titre
- Acoustic emission characteristics of GFRP composites as a function of the interface quality and its aging
- auteur
- Patricia Krawczak, José Pabiot
- article
- 5th International Symposium on Acoustic Emission from Composite Materials (AECM-5), Jul 1995, Sundsvall, Sweden. pp.71-80
- Accès au bibtex
-
- titre
- Evaluation of the environmental degradation of composite interfaces by means of macroscopic characterization methods
- auteur
- Patricia Krawczak, José Pabiot
- article
- Symposium of Interfacial Materials Science on Composites (SIMS-C IV), May 1995, Tokyo, Japan. pp.192-195
- Accès au bibtex
-
- titre
- Fracture mechanics applied to the analysis of the degradation of anti-corrosion glass/resin pipes as a function of the fibre/matrix interface quality
- auteur
- Patricia Krawczak, José Pabiot
- article
- International Conference on Composite Materials and Energy (Enercomp'95), May 1995, Montréal, Canada. pp.181-188
- Accès au bibtex
-
1994
Journal articles
- titre
- Acoustic emission applied to glass fibre/organic thermosetting matrix interface characterization
- auteur
- Patricia Krawczak, José Pabiot
- article
- Applied Composite Materials, 1994, 1 (5), pp.373 - 386. ⟨10.1007/BF00568042⟩
- Accès au bibtex
-
Conference papers
- titre
- Contribution de l'interface à la cohésion de composites verre/époxy sous différentes lois de chargement
- auteur
- Patricia Krawczak, José Pabiot
- article
- 9èmes Journées Nationales sur les Composites (JNC-9), Nov 1994, Saint-Etienne, France. pp.143-152
- Accès au bibtex
-
- titre
- Influence des paramètres de cohesion du composite sur l'endommagement mécanique de structures tubulaires verre/epoxy
- auteur
- Christophe Monnier, Patricia Krawczak, José Pabiot
- article
- 9èmes Journées Nationales sur les Composites (JNC-9), Nov 1994, Saint-Etienne, France. pp.677-685
- Accès au bibtex
-
- titre
- Application de la mécanique de la rupture à l'analyse de la dégradation de canalisations anti-corrosion verre/résine en fonction de la qualité de l'interface fibre/matrice
- auteur
- Patricia Krawczak, Michel Benteyn, José Pabiot
- article
- Conférence Internationale de l'Institut Français du Pétrole (IFP) "Matériaux composites dans l'industrie pétrolière", Institut Français du Pétrole (IFP), Nov 1994, Rueil-Malmaison, France
- Accès au bibtex
-
- titre
- Influence of water absorption on the cracks initiation and propagation of glass/epoxy composites as a function of interface quality
- auteur
- Yatchko Ivanov, Patricia Krawczak, José Pabiot
- article
- 7th Conference on Mechanics and Technology of Composite Materials, Oct 1994, Sofia, Bulgaria
- Accès au bibtex
-
- titre
- Influence of water absorption on the behaviour of polymer matrix composites
- auteur
- Yatchko Ivanov, Patricia Krawczak, José Pabiot
- article
- 4th European Rheology Conference, Sep 1994, Sevilla, Spain. pp.57-59
- Accès au bibtex
-
- titre
- Contribution mechanisms of the glass fibre/epoxy matrix interface to the composite materials' cohesion and parameters of influence
- auteur
- Patricia Krawczak, José Pabiot
- article
- 8th International Conferences on Modern Materials and Technologies (CIMTEC), Forum on New Materials, Jun 1994, Florence, Italy
- Accès au bibtex
-
- titre
- Mechanical damage mechanisms of glass fibre composite pipes under internal pressure
- auteur
- José Pabiot, Christophe Monnier, Patricia Krawczak
- article
- 8th International Conferences on Modern Materials and Technologies (CIMTEC), Forum on New Materials, Jun 1994, Florence, Italy
- Accès au bibtex
-
- titre
- Behaviour of glass-fibre composite pipes under internal pressure as a function of composite cohesion parameters
- auteur
- José Pabiot, Christophe Monnier, Patricia Krawczak
- article
- Composites Institute's 49th Annual Conference & EXPO '94, Feb 1994, Cincinnati, Ohio, United States. pp.1-7
- Accès au bibtex
-
1993
Journal articles
- titre
- Atlas de fractographie de composites
- auteur
- P. Jeannetaud, P. Krawczak, R. Bequignat, J. Pabiot, A. Lemascon, C. Bord, M. Vancon, M. Bard
- article
- Composites, 1993, 3, pp.213-217
- Accès au bibtex
-
- titre
- Influência da qualidade da interface fibra de vidro/matriz sobre o comportamento mecânico monoaxial e biaxial de placas e tubos em materiais compositos
- auteur
- Patricia Krawczak, José Pabiot
- article
- Contacto, 1993, 5 (25), pp.4-13
- Accès au bibtex
-
Conference papers
- titre
- Fabrication technologies induced porosity and its influence on the mechanical behaviour of thermoset matrix composites
- auteur
- Patricia Krawczak, José Pabiot
- article
- 6th European Conference on Composite Materials (ECCM-6), Sep 1993, Bordeaux, France. pp.95-100
- Accès au bibtex
-
- titre
- Analysis of the relationships between interface and damage in glass fibre / thermoset matrix composite materials as a function of the loading mode
- auteur
- Patricia Krawczak, José Pabiot
- article
- Ninth International Conference on Composite Materials (ICCM-9), Jul 1993, Madrid, Spain. pp.740-747
- Accès au bibtex
-
- titre
- Influence of glass-fibre/matrix interface as a composite cohesion parameter
- auteur
- Patricia Krawczak
- article
- Séminaire BEST "Composites", Jul 1993, Lille, France
- Accès au bibtex
-
- titre
- Long term damage of glass-fibre composite pipes under internal pressure
- auteur
- José Pabiot, Christophe Monnier, Patricia Krawczak
- article
- Japan-Europe Symposium on Composite Materials, Jun 1993, Nagoya, Japan
- Accès au bibtex
-
- titre
- Short-term and long-term behaviour of glass-fibre/matrix composite materials under monoaxial and biaxial loading as a function of the interface quality
- auteur
- Patricia Krawczak, José Pabiot
- article
- Advanced Composites '93, Feb 1993, Wollongong, Australia
- Accès au bibtex
-
Theses
- titre
- Study of the contribution of the interface to the cohesion of organic matrix/glass fibre composite materials
- auteur
- Patricia Krawczak
- article
- Polymères. Université de Lille 1 - Sciences et Technologies, 1993. Français. ⟨NNT : 1993LIL10137⟩
- Accès au bibtex
-
1992
Journal articles
- titre
- Influence de la qualité de l’interface fibre de verre / matrice sur le comportement mécanique monoaxial et biaxial de plaques et de tubes en matériaux composites
- auteur
- Patricia Krawczak, José Pabiot
- article
- Matériaux et Techniques, 1992, 80 (9-10), pp.3 - 10. ⟨10.1051/mattech/199280090003⟩
- Accès au bibtex
-
Conference papers
- titre
- Atlas de fractographie de composites
- auteur
- P. Jeannetaud, Patricia Krawczak, R. Bequignat, José Pabiot, A. Lemascon, C. Bord, M. Vancon, M. Bard
- article
- Colloque "La Construction Navale en Composites", Dec 1992, Paris, France. pp.365-374
- Accès au bibtex
-
- titre
- Les porosités générées par la mise en œuvre et leur influence sur le comportement mécanique des composites à matrice thermodurcissable
- auteur
- Patricia Krawczak, José Pabiot
- article
- Colloque National du Groupe Français d'Etudes et d'Applications des Polymères (GFP) "Génie des Procédés de la Transformation des Polymères", https://www.gfp.asso.fr/, Nov 1992, Lyon, France
- Accès au bibtex
-
- titre
- Atlas de fractographie de composites
- auteur
- P. Jeannetaud, Patricia Krawczak, R. Bequignat, José Pabiot, A. Lemascon, C. Bord, M. Vancon, M. Bard
- article
- 8èmes Journées Nationales sur les Composites (JNC8), Nov 1992, Palaiseau, France
- Accès au bibtex
-
- titre
- Einfluss der Qualität der Glasfaser/Matrix Haftung auf die mechanischen Eigenschaften von Verbund-Platten und -Rohren unter einachsiger und zweiachsiger Belastung
- auteur
- Patricia Krawczak, José Pabiot
- article
- Verbundwerk'92, 4. Internationaler Kongress für vertärkte Werkstoffe und Composite-Technologien, Jul 1992, Wiesbaden, Germany. pp.D13.1-18
- Accès au bibtex
-
1991
Journal articles
- titre
- La mesure des porosités dans les composites industriels et leur incidence sur les propriétés mécaniques
- auteur
- Patricia Krawczak, José Pabiot
- article
- Composites, 1991, 3, pp.291-295
- Accès au bibtex
-
Conference papers
- titre
- Influence et caractérisation industrielle de la qualité de l'interface fibres de verre/matrice
- auteur
- Patricia Krawczak
- article
- Journée CRIN - CNRS "Club Matériaux": Composites grande diffusion à matrice polymère et fibres de verre, Nov 1991, Paris, France
- Accès au bibtex
-
- titre
- Analysis of porosity in composite materials: Technological origins, measurement and influence on mechanical properties
- auteur
- Patricia Krawczak, José Pabiot
- article
- 6th Conference on Mechanics and Technology of Composite Materials, Bulgarian Academy of Sciences, Oct 1991, Sofia, Bulgaria. pp.18-21
- Accès au bibtex
-