2024
- titre
- Experimental analysis and numerical simulation of Laser welding of thin austenitic stainless-steel sheets using two models: Bilinear isotropic strain hardening model and Johnson–Cook model
- auteur
- Hichem Aberbache, Alexandre Mathieu, Rodolphe Bolot, Laurent Bleurvacq, Axel Corolleur, Fabrice Laurent
- article
- Journal of Advanced Joining Processes, 2024, 9, pp.100198. ⟨10.1016/j.jajp.2024.100198⟩
- Accès au bibtex
-
- titre
- Dissimilar welding between Cu–6Al–2Ni alloy and stainless steel 316L using continuous ytterbium YAG laser
- auteur
- Nathan Haglon, Rodolphe Bolot, Iryna Tomashchuk, Alexandre Mathieu, Sébastien Lafaye
- article
- Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2024, ⟨10.1177/14644207241245264⟩
- Accès au bibtex
-
- titre
- Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach
- auteur
- Hichem Aberbache, Alexandre Mathieu, Nathan Haglon, Rodolphe Bolot, Laurent Bleurvacq, Axel Corolleur, Fabrice Laurent
- article
- Journal of Manufacturing and Materials Processing, 2024, 8 (1), pp.20. ⟨10.3390/jmmp8010020⟩
- Accès au texte intégral et bibtex
-
2023
- titre
- Modeling of the residual stress state in laser welded assemblies from micrographs
- auteur
- H. Aberbache, R. Bolot, A. Mathieu, A. Corolleur, F. Laurent
- article
- Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2023, 54 (4), pp.496-501. ⟨10.1002/mawe.202200286⟩
- Accès au bibtex
-
- titre
- Atomization regime observation and characterization of an atomized pure zinc rod during centrifugal atomization using a LASER beam
- auteur
- B. Ravry, Alexandre Mathieu, J. Allenou, B. Stepnik, F. Bernard, F. Demoisson
- article
- Powder Technology, 2023, 415, pp.118139. ⟨10.1016/j.powtec.2022.118139⟩
- Accès au bibtex
-
2022
- titre
- Centrifugal atomization of stainless-steel rotating rods melted by a high-power LASER beam
- auteur
- B. Ravry, A. Mathieu, J. Allenou, B. Sinardet, S. Pernot, F. Bernard, B. Stepnik, F. Demoisson
- article
- Advanced Powder Technology, 2022, 33 (6), pp.103631. ⟨10.1016/j.apt.2022.103631⟩
- Accès au texte intégral et bibtex
-
2021
- titre
- On the mechanisms involved in the tensile strength of a dissimilar Ti6Al4V/316L laser welded assembly
- auteur
- Antoine Mannucci, Rodolphe Bolot, Iryna Tomashchuk, Alexandre Mathieu, Eugèn Cicala, Sébastien Lafaye
- article
- Metallurgical Research & Technology, 2021, 118 (6), pp.608. ⟨10.1051/metal/2021082⟩
- Accès au texte intégral et bibtex
-
- titre
- Effects of the powder, laser parameters and surface conditions on the molten pool formation in the selective laser melting of IN718
- auteur
- Yuze Li, Miha Založnik, Julien Zollinger, Lucas Dembinski, Alexandre Mathieu
- article
- Journal of Materials Processing Technology, 2021, 289, pp.116930. ⟨10.1016/j.jmatprotec.2020.116930⟩
- Accès au texte intégral et bibtex
-
2020
- titre
- Laser-assisted narrow gap arc welding of an 18MND5 steel thick plate
- auteur
- Alexandre Mathieu, Iuliia Tkachenko, Iryna Tomashchuk, Eugen Cicala, Rodolphe Bolot
- article
- Procedia CIRP, 2020, 94, pp.551 - 556. ⟨10.1016/j.procir.2020.09.181⟩
- Accès au texte intégral et bibtex
-
- titre
- Polarimetric imaging method for surface quality evaluation of a liquid metal pool obtained during welding
- auteur
- Abir Zanzouri Kechiche, Olivier Aubreton, Alexandre Mathieu, Antoine Mannucci, Christophe Stolz
- article
- Optical Engineering, 2020, 59 (10), ⟨10.1117/1.OE.59.10.100501⟩
- Accès au bibtex
-
- titre
- Tandem laser-gas metal arc welding joining of 20 mm thick super duplex stainless steel: An experimental and numerical study
- auteur
- A Mathieu, I Tkachenko, JM Jouvard, I Tomashchuk
- article
- Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020, 234 (5), pp.697-710. ⟨10.1177/1464420720904113⟩
- Accès au bibtex
-
- titre
- Use of pure vanadium and niobium/copper inserts for laser welding of titanium to stainless steel
- auteur
- A. Mannucci, I. Tomashchuk, A. Mathieu, Rodolphe Bolot, E. Cicala, S. Lafaye, C. Roudeix
- article
- Journal of Advanced Joining Processes, 2020, 1, pp.100022. ⟨10.1016/j.jajp.2020.100022⟩
- Accès au bibtex
-
- titre
- Tandem laser-gas metal arc welding joining of 20 mm thick super duplex stainless steel: An experimental and numerical study
- auteur
- A Mathieu, I Tkachenko, JM Jouvard, I Tomashchuk
- article
- Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020, 234 (5), pp.697-710. ⟨10.1177/1464420720904113⟩
- Accès au bibtex
-
- titre
- Microstructure and mechanical properties of dissimilar Ti/Nb/Cu/steel laser joints
- auteur
- Antoine Mannucci, Iryna Tomashchuk, Rodolphe Bolot, Alexandre Mathieu, Sébastien Lafaye
- article
- Procedia CIRP, 2020, 94, pp.644-648. ⟨10.1016/j.procir.2020.09.100⟩
- Accès au bibtex
-
2019
- titre
- Using polarimetric imaging for automatic segmentation of weld pool
- auteur
- A Zanzouri Kechiche, Olivier Aubreton, Alexandre Mathieu, Christophe Stolz
- article
- Fourteenth International Conference on Quality Control by Artificial Vision, May 2019, Mulhouse, France. pp.54, ⟨10.1117/12.2521681⟩
- Accès au bibtex
-
- titre
- Solidification microstructure during selective laser melting of Ni based superalloy: experiment and mesoscopic modelling
- auteur
- Yuze Li, Antonio Olmedilla, Miha Založnik, Julien Zollinger, Lucas Dembinski, Alexandre Mathieu
- article
- IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.012004. ⟨10.1088/1757-899X/529/1/012004⟩
- Accès au bibtex
-
- titre
- Mechanical properties and microstructural study of homogeneous and heterogeneous laser welds in α, β,and α + β titanium alloys
- auteur
- Laurent Weiss, Julien Zollinger, Pierre Sallamand, Eugen Cicala, Alexandre Mathieu, Eric Fleury
- article
- Welding in the World, 2019, 63 (1), pp.53-62. ⟨10.1007/s40194-018-0627-1⟩
- Accès au texte intégral et bibtex
-
2018
- titre
- Direct laser welding of pure titanium to austenitic stainless steel
- auteur
- Antoine Mannucci, Iryna Tomashchuk, Alexandre Mathieu, Eugen Cicala, Tommy Boucheron, Rodolphe Bolot, Sebastien Lafaye
- article
- Procedia CIRP, 2018, 74, pp.485-490. ⟨10.1016/j.procir.2018.08.138⟩
- Accès au bibtex
-
2017
- titre
- Use of polarimetric imaging of emissive objects
- auteur
- A Zanzouri Kechiche, Olivier Aubreton, Alexandre Mathieu, Christophe Stolz
- article
- THIRTEENTH INTERNATIONAL CONFERENCE ON QUALITY CONTROL BY ARTIFICIAL VISION 2017, May 2017, Tokyo, Japan. pp.UNSP 103380Q, ⟨10.1117/12.2266940⟩
- Accès au bibtex
-
2016
- titre
- A combined three-dimensional digitisation and subsurface defect detection data using active infrared thermography
- auteur
- Mohamed Belkacemi, Christophe Stolz, Alexandre Mathieu, Guillaume Lemaître, Olivier Aubreton
- article
- 13th Quantitative Infrared Thermography Conference (QIRT), Jul 2016, Gdansk, Poland. ⟨10.21611/qirt.2016.006⟩
- Accès au texte intégral et bibtex
-
- titre
- Weld pool surface temperature measurement from polarization state of thermal emission
- auteur
- Nicolas Coniglio, Alexandre Mathieu, Olivier Aubreton, Christophe Stolz
- article
- Quantitative InfraRed Thermography Journal, 2016, 13 (1), pp.83-93. ⟨10.1080/17686733.2015.1102475⟩
- Accès au texte intégral et bibtex
-
2015
- titre
- Nondestructive testing based on scanning-from-heating approach: application to nonthrough defect detection and fiber orientation assessment
- auteur
- Belkacemi Mohammed, Christophe Stolz, Alexandre Mathieu, Guillaume Lemaitre, Olivier Aubreton, Johan Massich
- article
- Journal of Electronic Imaging, 2015, 24 (6), pp.061112. ⟨10.1117/1.JEI.24.6.061112⟩
- Accès au bibtex
-
- titre
- Non Destructive Testing based on a Scanning-From-Heating approach: Application to non-through defect detection and fiber orientation assessment
- auteur
- Mohamed Belkacemi, Christophe Stolz, Alexandre Mathieu, Guillaume Lemaître, Joan Massich, Olivier Aubreton
- article
- Journal of Electronic Imaging, 2015, 24 (6), pp.061112. ⟨10.1117/1.JEI.24.6.061112⟩
- Accès au texte intégral et bibtex
-
- titre
- Real time polarization imaging of weld pool surface
- auteur
- Christophe Stolz, Coniglio Nicolas, Alexandre Mathieu, Olivier Aubreton
- article
- The International Conference on Quality Control by Artificial Vision, Jun 2015, Le Creusot, France
- Accès au bibtex
-
2014
- titre
- Weld pool surface temperature measurement from polarization state of thermal emission
- auteur
- Nicolas Coniglio, Alexandre Mathieu, Olivier Aubreton, Christophe Stolz
- article
- 12th International conderence on Quantitative InfraRed Thermography (QIRT), Jul 2014, Bordeaux, France
- Accès au bibtex
-
- titre
- Plasma effect on weld pool surface reconstruction by shape-from-polarization analysis
- auteur
- Nicolas Coniglio, Alexandre Mathieu, Olivier Aubreton, Christophe Stolz
- article
- Applied Physics Letters, 2014, 104, pp.131603. ⟨10.1063/1.4870505⟩
- Accès au bibtex
-
- titre
- The numerical simulation of heat transfer during a hybrid laser–MIG welding using equivalent heat source approach
- auteur
- Issam Bendaoud, Simone Mattei, Eugen Cicala, Iryna Tomashchuk, Henri Andrzejewski, Pierre Sallamand, Alexandre Mathieu, Fréderic Bouchaud
- article
- Optics and Laser Technology, 2014, 56, pp.334-342. ⟨10.1016/j.optlastec.2013.09.007⟩
- Accès au texte intégral et bibtex
-
2013
- titre
- Characterizing weld pool surfaces from polarization state of thermal emissions
- auteur
- Coniglio Nicolas, Alexandre Mathieu, Olivier Aubreton, Christophe Stolz
- article
- Optics Letters, 2013, 38 (12), pp.2086-2088. ⟨10.1364/OL.38.002086⟩
- Accès au bibtex
-
2009
- titre
- Using infrared thermography in order to compare laser and hybrid (laser plus MIG) welding processes
- auteur
- Simone Matteï, Dominique Grevey, Alexandre Mathieu, Laetitia Kirchner
- article
- Optics and Laser Technology, 2009, 41 (6), p. 665-670. ⟨10.1016/j.optlastec.2009.02.005⟩
- Accès au bibtex
-
2007
- titre
- Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)
- auteur
- Alexandre Mathieu, Shabadi Rajashekar, Alexis Deschamps, Michel Suéry, Simone Matteï, Dominique Grevey, Eugen Cicala
- article
- Optics and Laser Technology, 2007, 39 (3), pp.652-661. ⟨10.1016/j.optlastec.2005.08.014⟩
- Accès au bibtex
-
- titre
- Dissimilar material joining using laser (aluminium to steel using zinc-based filler wire)
- auteur
- A. Mathieu, R. Shabadi, A. Deschamps, M. Suéry, S. Matteï, D. Grevey, E. Cicala
- article
- Optics and Laser Technology, 2007, 39, pp.652-661
- Accès au bibtex
-
2006
- titre
- Temperature control in laser brazing of a steel/aluminium assembly using thermographic measurements
- auteur
- A. Mathieu, Simone Mattei, A. Deschamps, B. Martin, Dominique Grevey
- article
- NDT & E International, 2006, 39 (4), pp.272-276. ⟨10.1016/j.ndteint.2005.08.005⟩
- Accès au bibtex
-
- titre
- Laser brazing of a steel/aluminium assembly with hot filler wire (88% Al, 12% Si)
- auteur
- Alexandre Mathieu, Sebastien Pontevicci, Jean-Claude Viala, Eugen Cicala, Simone Mattei, Dominique Grevey
- article
- Materials Science and Engineering: A, 2006, 435-436, pp.19-28. ⟨10.1016/j.msea.2006.07.099⟩
- Accès au bibtex
-